17 Greatest Cold Finger Condensers

 

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser 1420 Inner Joint 13 mm Length Below Joint

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint - Top hose connection is cooling inlet and middle hose connection is cooling outlet. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size. Condenser for use in refluxing from 1 to 20ml of solvent in flasks having a capacity of 5 to 50ml. Hose connection is 10mm at the largest serration. Minimal surface area provides for better yields while providing adequate cooling.

 

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint - Of 10mm at the middle serration. Condenser has an inner joint and a sealed lower drip tip for drop control. D. Hose connections have an o.

 

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 2440 Joints

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 24/40 Joints

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 24/40 Joints - D rubber tubing for water in and out. Used in sublimation apparatus. Liquid circulating through to keep the condenser cold. With 8 glass hose connections to accommodate 6mm i. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With 24/40 inner joint, the length of the part below joint is 200mm.

 

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser 50mm Flange Diameter 15 x 75mm Length Size A 6-34 Total Height

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser, 50mm Flange Diameter, 15 x 75mm Length, Size A, 6-3/4″ Total Height

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser, 50mm Flange Diameter, 15 x 75mm Length, Size A, 6-3/4″ Total Height - Size a finger is 15 x 75mm long. All sizes have a flange on which they are suspended without use of stopper. Flange diameter 50mm. 6-3/4″ total height. Borosilicate glass material.

 

Chemglass CG-3030-03  Series CG-3030 Cold Finger Condenser for Micro Sublimer

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer - The sublime has a capacity of 3ml between the lower portion of the cold finger and the interior bottom of the flask. With 24/25 standard taper joints to connect the flask and cold finger condenser. 5 grams. Micro scale sublimer can be used with quantities as small as 0.

 

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint - Hose connections have an o. D. Condenser has an inner joint and a sealed lower drip tip for drop control. Of 10mm at the middle serration.

 

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger Hose Barb for 38 Tubing Length Below Joint 215 mm 2440 Joint

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 215 mm, 24/40 Joint

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 215 mm, 24/40 Joint - Cold finger accessory for standard allihn type condensers. Has two upper, glass, size d hose connections that take 3/8-inch tubing. Fits into 5943, 5945, and 5946 condensers. This cold finger has a 24/40 inner joint that fits inside the condenser’s upper outer joint and tube to provide added cooling ability and faster condensation.

 

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 1922 Joint and Removable Hose Connections

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 19/22 Joint and Removable Hose Connections

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 19/22 Joint and Removable Hose Connections - With removable hose connections. Used in sublimation apparatus. Liquid circulating through to keep the condenser cold. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With 19/22 inner joint, the length of the part below joint is 100mm.

 

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 2440 Joints

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 24/40 Joints

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 24/40 Joints - With 24/40 inner joint, the length of the part below joint is 250mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With 8 glass hose connections to accommodate 6mm i. Liquid circulating through to keep the condenser cold. D rubber tubing for water in and out. Used in sublimation apparatus.

 

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb 2440 Standard Taper Joint 125 mm Cold Finger Coil Length

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb, 24/40 Standard Taper Joint, 125 mm Cold Finger Coil Length

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb, 24/40 Standard Taper Joint, 125 mm Cold Finger Coil Length - Ref astm method d94, d95. Two hose connectors at the top for water inlet and outlet. Standard taper outer joint at the top, standard taper inner drip joint at the bottom. With an internal, coil-type cold finger. 283000 does not have a drip joint.

 

Laboy HMC010401 Glass Cold Finger Condenser 100 mm Length Below Joint with 1420 Joints

Laboy HMC010401 Glass Cold Finger Condenser 100 mm Length Below Joint with 14/20 Joints

Laboy HMC010401 Glass Cold Finger Condenser 100 mm Length Below Joint with 14/20 Joints - With 8 glass hose connections to accommodate 6mm i. Liquid circulating through to keep the condenser cold. D rubber tubing for water in and out. Used in sublimation apparatus. With 14/20 inner joint, the length of the part below joint is 100mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.

 

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser - This specially designed pyrex® cold finger condenser is a replacement part for the pyrex® cyanide distilling apparatus (no. 3350-c).

 

Corning Pyrex Borosilicate Glass Cold Finger Condensers 2440 Standard Taper Inner Joints 10mm Tubulation OD 12mm Jacket OD x 86mm Jacket Length

Corning Pyrex Borosilicate Glass Cold Finger Condensers, 24/40 Standard Taper Inner Joints, 10mm Tubulation O.D, 12mm Jacket O.D. x 86mm Jacket Length

Corning Pyrex Borosilicate Glass Cold Finger Condensers, 24/40 Standard Taper Inner Joints, 10mm Tubulation O.D, 12mm Jacket O.D. x 86mm Jacket Length - The tubulation o. This simple pyrex cold finger condenser, of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). D. 6949. This condenser has a 24/40 inner standard taper joint and is a replacement part for organic chemistry kit, no. Is approximately 10mm.

 

Glass Cold Finger Condenser 200mm In Length Below Joint 2440

Glass Cold Finger Condenser 200mm In Length Below Joint 24/40

Glass Cold Finger Condenser 200mm In Length Below Joint 24/40 - With removable hose connections. Made of borosilicate glass. 100mm in length below joint14/20. Made by hand blowing. With 14/20joints.

 

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser Standard Taper 2440

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40 - Distilling heads have an upper standard taper 29/42 outer, a lower standard taper inner, and two stopcocks which are in the pressure equalizing line allowing receiver changes without interrupting the distillation. Thermometer joint is standard taper 10/30. Made of borosilicate glass these distilling heads feature a removable cold finger condenser with a standard taper 29/42 inner.

 

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger Hose Barb for 38 Tubing Length Below Joint 110 mm 2440 Joint

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 110 mm, 24/40 Joint

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 110 mm, 24/40 Joint - Fits into 5943, 5945, and 5946 condensers. Has two upper, glass, size d hose connections that take 3/8-inch tubing. Cold finger accessory for standard allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser’s upper outer joint and tube to provide added cooling ability and faster condensation.

 

Cold Finger Condenser Components TS Joint 1420 165mm - 282000-0000 - EACH

Cold Finger Condenser, Components, TS Joint: 14/20, 165mm – 282000-0000 – EACH

Cold Finger Condenser, Components, TS Joint: 14/20, 165mm – 282000-0000 – EACH - Kimble chase life science and research products ll. Kimble chase life science and research products ll.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.