25 Best and Coolest Microfiber Filters

 

Whatman 1950-007 3 Piece Filter Funnel for Glass Microfiber Filter 115mL Capacity 70mm Diameter

Whatman 1950-007 3 Piece Filter Funnel for Glass Microfiber Filter, 115mL Capacity, 70mm Diameter

Whatman 1950-007 3 Piece Filter Funnel for Glass Microfiber Filter, 115mL Capacity, 70mm Diameter - Filter funnel height 15. 6 cm sq. The funnel is quickly dismantled ready for the insertion of a new filter. Positive filter clamping all retained solids are deposited within the filter circle. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal. Filter support plate diameter 7cm. Effective filtration area 19. 9cm. The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Simple to clean the parts can be quickly and efficiently cleaned because of the simplicity of the design. Whatman 3-piece filter funnels have been designed to complement the range of whatman fine particle retention, rapid flow rate glass microfiber filters. Functional design three-piece construction. Effective filtration diameter 5cm. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle. Filter dimensions 7cm.

 

LabExact 1200031 Grade 934AH Glass Microfiber Filter Binderless Borosilicate Glass 15µm 47cm Pack of 100

LabExact 1200031 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 4.7cm (Pack of 100)

LabExact 1200031 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 4.7cm (Pack of 100) - In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi process removal of sediment and coarse particulate. Fine porosity, fast flow rate with a 1. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Glass microfiber filters without binders are an ideal medium to entrap sediment for further analysis and counting due to the inert matrix. The fibers used to manufacture these depth filters are smooth and uniform. Binderless borosilicate glass microfiber enables use up to 550ºc. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. 5 um size particle retention. 2). These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. This material is the standard for suspended solids content and related measurements (standard methods 2540d and epa method 160. Also, depth filtration media are commonly used for prefiltration prior to surface filtration with substrates such as membranes. Labexact 934-ah glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. Also widely used in cell harvesting applications and ria scintillation counting.

 

Whatman 1822-150 Glass Microfiber Binder Free Filter 12 Micron 67 s100mL Flow Rate Grade GFC 150cm Diameter Pack of 100

Whatman 1822-150 Glass Microfiber Binder Free Filter, 1.2 Micron, 6.7 s/100mL Flow Rate, Grade GF/C, 15.0cm Diameter (Pack of 100)

Whatman 1822-150 Glass Microfiber Binder Free Filter, 1.2 Micron, 6.7 s/100mL Flow Rate, Grade GF/C, 15.0cm Diameter (Pack of 100) - It is the standard filter in many parts of the world for the collection of suspended solids in potable water and natural and industrial wastes. This filter is widely used for cell harvesting, liquid scintillation counting and binding assays where more loading capacity is required. 0cm. This whatman gf/c glass microfiber filter combines fine particle retention with good flow rate. Whatman # 1822-150. 2µm. Retention 1. 100/pack. Diameter 15. It provides fast and efficient clarification of aqueous liquids containing low to medium levels of fine particulates.

 

Whatman 1950-009 3 Piece Filter Funnel for Glass Microfiber Filter 200mL Capacity 90mm Diameter

Whatman 1950-009 3 Piece Filter Funnel for Glass Microfiber Filter, 200mL Capacity, 90mm Diameter

Whatman 1950-009 3 Piece Filter Funnel for Glass Microfiber Filter, 200mL Capacity, 90mm Diameter - Filter dimensions 9cm. Simple to clean the parts can be quickly and efficiently cleaned because of the simplicity of the design. Functional design three-piece construction. Filter funnel height 17. Whatman 3-piece filter funnels have been designed to complement the range of whatman fine particle retention, rapid flow rate glass microfiber filters. 5 cm sq. The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Effective filtration area 38. Effective filtration diameter 7cm. 9cm. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal. The funnel is quickly dismantled ready for the insertion of a new filter. Filter support plate diameter 9cm. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle. Positive filter clamping all retained solids are deposited within the filter circle.

 

LabExact 1200149 Grade TSS Glass Microfiber Filter Binderless Borosilicate Glass 15µm 90cm Pack of 100

LabExact 1200149 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 9.0cm (Pack of 100)

LabExact 1200149 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 9.0cm (Pack of 100) - Grade tss is a binderless high efficiency (hepa type) filter medium with particle retention of 1. High flow rate with high capacity. Binderless borosilicate glass fiber media has no added extractables to aid in the elimination of sample contamination. Excellent wet strength. Other common applications include gravimetric analysis of air pollutants, membrane support pads, membrane prefilters, clarification of reagent and buffer solutions, filtration of eluent for hplc and moisture analysis pads. Liquid filtration properties have been specifically designed for epa methods 2540c and 2540d for testing dissolved and suspended solids in water and wastewater. 50um.

 

LabExact 1200148 Grade TSS Glass Microfiber Filter Binderless Borosilicate Glass 15µm 70cm Pack of 100

LabExact 1200148 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 7.0cm (Pack of 100)

LabExact 1200148 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 7.0cm (Pack of 100) - Other common applications include gravimetric analysis of air pollutants, membrane support pads, membrane prefilters, clarification of reagent and buffer solutions, filtration of eluent for hplc and moisture analysis pads. Liquid filtration properties have been specifically designed for epa methods 2540c and 2540d for testing dissolved and suspended solids in water and wastewater. High flow rate with high capacity. Binderless borosilicate glass fiber media has no added extractables to aid in the elimination of sample contamination. 50um. Grade tss is a binderless high efficiency (hepa type) filter medium with particle retention of 1. Excellent wet strength.

 

Thomas C9000-2 Borosilicate Glass Microfiber Filter 12 Micron Fast Flow Grade C 9cm Diameter Pack of 50

Thomas C9000-2 Borosilicate Glass Microfiber Filter, 1.2 Micron, Fast Flow, Grade C, 9cm Diameter (Pack of 50)

Thomas C9000-2 Borosilicate Glass Microfiber Filter, 1.2 Micron, Fast Flow, Grade C, 9cm Diameter (Pack of 50) - 50 grams per meter squared basis weight. The fibrous material within the filter is commonly glass micro fiber or polypropylene. Primarily used for ria procedures and harvesting lymphocytes. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi-process removal of sediment and course particulate. Binderless borosilicate glass microfiber. Glass micro fiber filters are available without binders, making the inertmatrix an ideal medium to entra-sediment for further analysis and counting. Depth filtration glass micro fiber. Also, depth filtration media is commonly used as pre-filtration prior to surface filtration substrates such as membranes. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence of, if any, binder material that acts as a strengthening agent and aids in holding the fibers together. Fine porosity, fast flow rate, with a 1. 2 micrometer size particle retention. The efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap.

 

Ahlstrom 1510-0250 Borosilicate Glass Microfiber Filter Paper 07 Micron Slow Flow Grade 151 25cm Diameter Box of 100

Ahlstrom 1510-0250 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 2.5cm Diameter (Box of 100)

Ahlstrom 1510-0250 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 2.5cm Diameter (Box of 100) - 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 percent c), long shelf life, brilliant white color reflecting more than 96 degree of visible light, custom cut. 7 micrometer, 3. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. In the filtration of nucleic acids and difficult biochemical solutions, grade 151 is used in combination with grade 141 as a highly efficient protective and retentive pre-filter to extend the loading capacity of membrane filters. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Grade 151 is recommended for use in tclp procedure as described in test methods for evaluating solid wastes, epa method 1311. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Grade 151 is recommended for filtering fine precipitated proteins. 7 micrometer. This high performance grade is designed to retain extremely fine particles down to 0. Grade 151 has retention comparable to membrane filter while providing higher flow and loading capacity. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0.

 

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter 10 Micron Medium Flow Grade 131 24cm Diameter Pack of 100

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter, 1.0 Micron, Medium Flow, Grade 131, 24cm Diameter (Pack of 100)

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter, 1.0 Micron, Medium Flow, Grade 131, 24cm Diameter (Pack of 100) - 7 micrometer, 3. Ahlstrom 131 is recommended for the collection of suspended solids in potable water and in industrial wastes. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. This standard grade found in many environmental applications offers slightly more retention than ahlstrom 111 with slightly lower filtration speed and loading capacity. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Ahlstrom offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. In biochemical tests, ahlstrom 131 is suited for cell harvesting, liquid scintillation counting and the analysis of carbohydrates.

 

Thomas B1100 Borosilicate Glass Microfiber Filter 1 Micron Medium-Fast Flow Grade B 11cm Diameter Pack of 100

Thomas B1100 Borosilicate Glass Microfiber Filter, 1 Micron, Medium-Fast Flow, Grade B, 11cm Diameter (Pack of 100)

Thomas B1100 Borosilicate Glass Microfiber Filter, 1 Micron, Medium-Fast Flow, Grade B, 11cm Diameter (Pack of 100) - The fibrous material within the filter is commonly glass micro fiber or polypropylene. Glass micro fiber filters are available without binders, making the inertmatrix an ideal medium to entra-sediment for further analysis and counting. Also, depth filtration media is commonly used as pre-filtration prior to surface filtration substrates such as membranes. Depth filtration glass micro fiber. Because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi-process removal of sediment and course particulate. This material is twice as thick as grade a with a higher loading capacity. Binderless borosilicate glass microfiber. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence of, if any, binder material that acts as a strengthening agent and aids in holding the fibers together. 140 grams per meter squared basis weight. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. The efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap. May also be used as a solid particulate filter for gasses or as a prefilter. Fine porosity, medium to fast flow rate, with a 1 micrometer size particle retention. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media.

 

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper 07 Micron Slow Flow Grade 151 7cm Diameter Box of 100

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 7cm Diameter (Box of 100)

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 7cm Diameter (Box of 100) - Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. 7 micrometer. In the filtration of nucleic acids and difficult biochemical solutions, grade 151 is used in combination with grade 141 as a highly efficient protective and retentive pre-filter to extend the loading capacity of membrane filters. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. Grade 151 is recommended for use in tclp procedure as described in test methods for evaluating solid wastes, epa method 1311. Grade 151 has retention comparable to membrane filter while providing higher flow and loading capacity. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Grade 151 is recommended for filtering fine precipitated proteins. 7 micrometer, 3. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. This high performance grade is designed to retain extremely fine particles down to 0. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 percent c), long shelf life, brilliant white color reflecting more than 96 degree of visible light, custom cut. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions.

 

LabExact 1200358 Grade D Glass Microfiber Filter Binderless Borosilicate Glass 27µm 125cm Pack of 100

LabExact 1200358 Grade D Glass Microfiber Filter, Binderless Borosilicate Glass, 2.7µm, 12.5cm (Pack of 100)

LabExact 1200358 Grade D Glass Microfiber Filter, Binderless Borosilicate Glass, 2.7µm, 12.5cm (Pack of 100) - The fibers used to manufacture these depth filters are smooth and uniform. Grade d coarse porosity, fast flow rate, with a 2. Glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Well suited for higher volume and repetitive laboratory filtering. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. Also ideally used as a general pre-filter to extend primary filter life. 7um size particle retention. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity.

 

LabExact 1200215 Grade B Glass Microfiber Filter Binderless Borosilicate Glass 10µm 125cm Pack of 100

LabExact 1200215 Grade B Glass Microfiber Filter, Binderless Borosilicate Glass, 1.0µm, 12.5cm (Pack of 100)

LabExact 1200215 Grade B Glass Microfiber Filter, Binderless Borosilicate Glass, 1.0µm, 12.5cm (Pack of 100) - Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. May also be used as a solid particulate filter for gasses or as a prefilter. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. Grade b fine porosity, medium to fast flow rate, with a 1. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. 0um size particle retention. This material is twice as thick as grade a with a higher loading capacity. The fibers used to manufacture these depth filters are smooth and uniform.

 

LabExact 1200022 Grade 934AH Glass Microfiber Filter Binderless Borosilicate Glass 15µm 125cm Pack of 100

LabExact 1200022 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 12.5cm (Pack of 100)

LabExact 1200022 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 12.5cm (Pack of 100) - These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. The fibers used to manufacture these depth filters are smooth and uniform. This material is the standard for suspended solids content and related measurements (standard methods 2540d and epa method 160. 5 um size particle retention. Fine porosity, fast flow rate with a 1. Also widely used in cell harvesting applications and ria scintillation counting. Glass microfiber filters without binders are an ideal medium to entrap sediment for further analysis and counting due to the inert matrix. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Also, depth filtration media are commonly used for prefiltration prior to surface filtration with substrates such as membranes. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi process removal of sediment and coarse particulate. 2). Binderless borosilicate glass microfiber enables use up to 550ºc. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. Labexact 934-ah glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity.

 

Whatman 1820-150 Glass Microfiber Binder Free Filter 16 Micron 43 s100mL Flow Rate Grade GFA 150cm Diameter Pack of 100

Whatman 1820-150 Glass Microfiber Binder Free Filter, 1.6 Micron, 4.3 s/100mL Flow Rate, Grade GF/A, 15.0cm Diameter (Pack of 100)

Whatman 1820-150 Glass Microfiber Binder Free Filter, 1.6 Micron, 4.3 s/100mL Flow Rate, Grade GF/A, 15.0cm Diameter (Pack of 100) - Recommended for gravimetric determination of airborne particulates, stack sampling and absorption methods of air pollution monitoring. Grade gf/a retention 16µm. Fine particle retention high flow rate good loading capacity used for high efficiency general purpose laboratory filtration. Diameter 150cm. Uses include water pollution monitoring of effluents, water filtration, algae and bacteria cultures, foodstuff analyses, protein filtration, radioimmunoassay of weak ß emitters.

 

Whatman 1825-125 Glass Microfiber Binder Free Filter 07 Micron 19 s100mL Flow Rate Grade GFF 125cm Diameter Pack of 25

Whatman 1825-125 Glass Microfiber Binder Free Filter, 0.7 Micron, 19 s/100mL Flow Rate, Grade GF/F, 12.5cm Diameter (Pack of 25)

Whatman 1825-125 Glass Microfiber Binder Free Filter, 0.7 Micron, 19 s/100mL Flow Rate, Grade GF/F, 12.5cm Diameter (Pack of 25) - Whatman # 1825-125. Unlike membrane filters with a comparable retention value, it has a very rapid flow rate with a high loading capacity. Very effective in filtering finely precipitated proteins, gf/f can be used in conjunction with gf/d as a prefilter for the successful clarification of difficult biochemical solutions and fluids, and nucleic acids. Gf/f filters are suitable for critical applications including enumeration of salmonella and pseudomonas aeroginosa, clarification of protein solutions and filtering samples and solvents prior to hplc. Recommended for dna binding and purification. 25/pack. It remains today the filter of choice. 6µm-0. 8µm particle retention and pure borosilicate glass structure, gf/f is the material upon which the epa method tclp 1311 for toxicity characteristic leaching procedure was developed. 5cm. Diameter 12. Because of the tight specification of 0. 7µm. Retention 0. The whatman high efficiency gf/f filter will retain fine particles down to 0. 7µm.

 

Whatman 1827-055 934-AH Glass Microfiber Filters 15um 55cm 100Box

Whatman 1827-055 934-AH Glass Microfiber Filters, 1.5um, 5.5cm; 100/Box

Whatman 1827-055 934-AH Glass Microfiber Filters, 1.5um, 5.5cm; 100/Box - All filters are packaged 100 per box. Glass microfiber filter papers are made entirely of borosilicate glass and contain no binders. Our whatman® filter papers offer you flexibility in filter choice without sacrificing quality. The industry standard for high-purity filtration available in a variety of grades and sizes. Use up to 550°c (1022°f).

 

AHLSTROM FILTRATION 1510-0470 Borosilicate Glass Series 151 Glass Microfiber Filter Paper 210 cm Diameter Pack of 100

AHLSTROM FILTRATION 1510-0470 Borosilicate Glass Series 151 Glass Microfiber Filter Paper, 2.10 cm Diameter (Pack of 100)

AHLSTROM FILTRATION 1510-0470 Borosilicate Glass Series 151 Glass Microfiber Filter Paper, 2.10 cm Diameter (Pack of 100) - Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required.

 

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper 31 Micron Fast Flow Grade 141 37cm Diameter Box of 100

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Fast Flow, Grade 141, 3.7cm Diameter (Box of 100)

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Fast Flow, Grade 141, 3.7cm Diameter (Box of 100) - A full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Fast speed, this grade offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. Grade 141 is particularly recommended for pre-filtration of membrane filters and is also used in combination with grade 121 as a highly efficient protective and retentive grade density pre-filter for membrane filters. 7 micrometer, 3. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut, standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions.

 

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 24cm Diameter Box of 100

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 24cm Diameter (Box of 100)

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 24cm Diameter (Box of 100) - This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Standard glass microfiber filters. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut.

 

Whatman 1827-110 934-AH Glass Microfiber Filters 15um 11cm 100Box

Whatman 1827-110 934-AH Glass Microfiber Filters, 1.5um, 11cm; 100/Box

Whatman 1827-110 934-AH Glass Microfiber Filters, 1.5um, 11cm; 100/Box - Our whatman® filter papers offer you flexibility in filter choice without sacrificing quality. The industry standard for high-purity filtration available in a variety of grades and sizes. All filters are packaged 100 per box. Use up to 550°c (1022°f). Glass microfiber filter papers are made entirely of borosilicate glass and contain no binders.

 

Ahlstrom 1610-0470 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 47cm Diameter Box of 100

Ahlstrom 1610-0470 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 4.7cm Diameter (Box of 100)

Ahlstrom 1610-0470 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 4.7cm Diameter (Box of 100) - Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. Standard glass microfiber filters. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers.

 

GE Whatman 9907-047 Grade 934-AH RTU Borosilicate Glass Microfiber Filter 47mm Diameter Pack of 100

GE Whatman 9907-047 Grade 934-AH RTU Borosilicate Glass Microfiber Filter, 47mm Diameter (Pack of 100)

GE Whatman 9907-047 Grade 934-AH RTU Borosilicate Glass Microfiber Filter, 47mm Diameter (Pack of 100) - The 934-ah rtu contains the trusted binder-free, high purity borosilicate glass microfiber filter mentioned in standard methods. This eliminates filter pre-treating and streamlines your laboratory process. Now it comes pre-washed and pre-weighed. Each rtu filter is packaged within an aluminum pan with the filter weight clearly printed on a heat resistant label. The 934-ah rtu meets the requirements under the latest edition of standard methods 2540d for determining total suspended solids in water.

 

Whatman 1827-090 Glass Microfiber Binder Free Filter 15 Micron 37 s100mL Flow Rate Grade 934-AH 90mm Diameter Pack of 100

Whatman 1827-090 Glass Microfiber Binder Free Filter, 1.5 Micron, 3.7 s/100mL Flow Rate, Grade 934-AH, 90mm Diameter (Pack of 100)

Whatman 1827-090 Glass Microfiber Binder Free Filter, 1.5 Micron, 3.7 s/100mL Flow Rate, Grade 934-AH, 90mm Diameter (Pack of 100) - This is a smooth surface, high-retention borosilicate glass microfiber filter which withstands temperatures over 500 degree c. Grade 934-ah the fine particle retention of this popular grade is superior for its high retention efficiency at high flow rates and its high loading capacity. Used for determining total suspended solids in water, removal of turbidity, and filtration of bacterial cultures. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting, and air pollution monitoring. Properties fast, high loading. Particle retention rating at 98 percent efficiency. Filtration speed herzberg (s) 47. 5. Basis weight(g/m sq) 64. Particle retention in liquid (µm) 1. Grade 934-ah is used for a wide range of laboratory applications.

 

Whatman 1823-047 GFD Glass Microfiber Filters 27um 47cm 100Box

Whatman 1823-047 GF/D Glass Microfiber Filters, 2.7um, 4.7cm; 100/Box

Whatman 1823-047 GF/D Glass Microfiber Filters, 2.7um, 4.7cm; 100/Box - The filter is thick and consequently exhibits a high loading capacity. The whatman gf/d glass microfiber filter is considerably faster in flow rate and overall filtration speed than cellulose filter papers of similar particle retention. Diameter 4. 7µm. 100/pack. Gf/d will provide good protection for finely retentive membranes. Designed as a membrane prefilter and available in sizes to fit most holders. 7cm. Whatman # 1823-047. Retention 2. Can be used in combination with gf/b to provide very efficient graded prefilter protection for membranes.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.