25 Most Wanted Fumes for 2019

 

Fume Hood Box with Horizontal Mount #ad

Fume Hood Box with Horizontal Mount

Fume Hood Box with Horizontal Mount #ad - Clean, filtered air is returned to the laboratory, eliminating the need for external ducting and minimizing loss of treated, conditioned air from the facility. Construction is white epoxy-coated steel with blue enclosure and clear sides and top panels. The unit offers a low-profile design thats completely portable. And international standards for safety and performance. No ductwork is required. Filter is selected based on application. The modular design permits multiple configurations. A hepa filter (sold separately) can be added for particulate control. Air science fume box ductless enclosures are designed to protect the user from chemicals, vapors or powders during low-volume chemical manipulations by effectively containing low concentrations of noxious fumes, vapors or powders. The fume box utilizes the exclusive air science multiplex filtration system, a unique configurationthat includes a pre-filter and main filter to create a chemical, physical or combination architecture to adsorb, neutralize or trap the target chemical or particulate while constant negative pressure removes vapors and particulates from the user’s breathing zone. Filters which fit this unit are ap60h-001, ap60h-015, or ap60h-030. S. The compact size is easily positioned on shallow countertops or counters with overhanging wall cabinets. A clear viewing enclosure prevents chemical splash. The main filter is easy to replace. The activated carbon filter (sold separately) adsorbs organic odors and hazardous vapors such as xylene and toluene. A. The filter clamps tightly against the filter gasket to prevent filter bypass and to maintain filter integrity the fume box maintains a constant face velocity of 100 fpm in compliance with u.

 

Labconco 2247401 Basic Fume Hood Epoxy-Coated Steel 47 Width 220V 50 Hz #ad

Labconco 2247401 Basic Fume Hood, Epoxy-Coated Steel, 47″ Width, 220V, 50 Hz

Labconco 2247401 Basic Fume Hood, Epoxy-Coated Steel, 47″ Width, 220V, 50 Hz #ad - All basic laboratory hoods are constructed of epoxy-coated steel, and are sensible for all areas of work—laboratories with low ceilings or narrow aisles. They have smaller dimensions that are economical with a shorter height and depth than traditional hoods, so they fit in areas with low ceilings or narrow aisles. Labconco basic fume hoods 70″ are one of the best in the market, offering an array of selections for basic chemistry applications where safe ventilation is a must, including light-duty enclosure for nuisance vapors, hood systems for toxic fume ventilation, or a more specialized ventilation system.

 

Erlab Captair FLOW 39 Laminar Ductless Fume Hood 115V #ad

Erlab Captair FLOW 39″ Laminar Ductless Fume Hood, 115V

Erlab Captair FLOW 39″ Laminar Ductless Fume Hood, 115V #ad - Order replacement filter 33520-26, separately. The flow cabinet is equipped with a blower and to handle an h14 hepa filter that has an efficiency of 99. Cabinet can be used with non-pathogenic or non-harmful materials, such as non-pathogenic cell culture or vitro culture. The hood protects the sample or product in the hood from contamination by using an h14 hepa filter to capture dust and particulates from the lab air before it flows down onto the samples or products in the hood. What’s included side utility ports, and 8-ft (2. Front-mounted control panel continuously monitors ventilation flow rate and alerts you via visable and audible alarm in the event of ventilation failure. 1 microns. 995 percent for particles larger than 0. Provides an ultra-clean, dust-free environment hepa filter included with cabinet. Cabinet also features two side panel utility ports to run electrical or fluid lines into the enclosure. The cabinet allows you to perform handlings in an ultra-clean, dust-free environment. 4 m) cord with plug.

 

TrippNT 50215 PVC Fume Hood Shelf 36 Width x 8 Height x 5 Depth 3  White #ad

TrippNT 50215 PVC Fume Hood Shelf, 36″ Width x 8″ Height x 5″ Depth, 3 ‘, White

TrippNT 50215 PVC Fume Hood Shelf, 36″ Width x 8″ Height x 5″ Depth, 3 ‘, White #ad - 36 x 8 x 5 inches (width height depth) 4 pounds. White pvc plastic construction with open back to allow air flow. Back cut outs allow laminar flow, keeps items off hood floor or step over smaller items. Ideal for use in the hood, contamination box or bench top. 3 foot shelf designed to hold, contain, and store supplies in the hood or on the bench.

 

Lee Engineering Aluminum Fume Hood Back Mounting Kit #ad

Lee Engineering Aluminum Fume Hood Back Mounting Kit

Lee Engineering Aluminum Fume Hood Back Mounting Kit #ad - Flexiable hose that attaches the fume extractor to the arm. Replacement parts for items included as part of the menda 35440 fume extractor kit. For use with menda model 35440 and 35445 fume extractors. The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow. The fume extractor should be installed in a well ventilated room.

 

Worksurface for Clean Aire II Fume Hood - Clean Aire II Ductless Fume Hoods #ad

Worksurface for Clean Aire II Fume Hood – Clean Aire II Ductless Fume Hoods

Worksurface for Clean Aire II Fume Hood – Clean Aire II Ductless Fume Hoods #ad - Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Filters, worksurface, and base stands are available separately. Equipped with 115v exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Hood is ideal for laboratories that require multiple locations or where space is limited.

 

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter 25 Width 115V 60Hz #ad

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter, 2.5′ Width, 115V, 60Hz

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter, 2.5′ Width, 115V, 60Hz #ad - Activated carbon, formaldehyde or ammonia filter (fume adsorber-2 models include two filters). Pre-wired with rear-mounted auxiliary electrical receptacle and top-mounted blower switch with circuit breaker. Clear, one-piece, 3/8″ thick, shatter-resistant acrylic canopy. Glacier white, dry powder, epoxy-coated steel housing with perforated baffle for uniform airflow. Built-in, motorized impeller to provide face velocity up to 35 fpm (fume adsorber-2 models include two impellers).

 

Purair 5 Ductless Fume Hood FormaldehydeGlutaraldehyde Filter #ad

Purair 5 Ductless Fume Hood Formaldehyde/Glutaraldehyde Filter

Purair 5 Ductless Fume Hood Formaldehyde/Glutaraldehyde Filter #ad - From our beginnings in 1927, carolina biological supply company has grown to become a leading supplier of science teaching materials for all levels of education today, from our headquarters in burlington, north carolina, we serve customers worldwide, including teachers, professors, homeschool educators, hobbyists, and professionals in health and science-related fields. When you shop with carolina, you’re not alone all of our products are backed by unparalleled technical support, available from 8am to 8pm, et, monday-friday contact information (live chat, email, and phone) is provided after placing your order at amazon. The carolina pledge 100% satisfaction guaranteed all of our products are unconditionally guaranteed if for any reason you are not satisfied with any item, you may return it for a replacement, a refund, or credit it’s that simple.

 

6 Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes vapors or dusts #ad

6′ Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes, vapors or dusts

6′ Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes, vapors or dusts #ad - Gas and water service valves ( more valves can be added), dual outlet and interior led light. 3′ flammable storage cabinet & 3′ acid storage cabinet both with epoxy powder coated paint to match fume hood. Dual glass sash / both veritical and horizontal moving sash. Epoxy work surface / chemical resistant black work surface. Made in the usa.

 

Purair Basic Ductless Fume Hood - 3 foot #ad

Purair Basic Ductless Fume Hood – 3 foot

Purair Basic Ductless Fume Hood – 3 foot #ad - Includes vapor proof fluorescent lighting, cable pass through ports and low airflow alarm. Operates on a standard 110v, 60hz outlet. Easy to operate controls. Not ductwork or make up air requirements. Carbon and hepa filters available to handle a variety of chemical vapors and/or particulates (sold separately).

 

Lee Engineering 8 Foot Aluminum Back Mount Lab-Frame Kit for Fume Hoods #ad

Lee Engineering 8 Foot, Aluminum, Back Mount Lab-Frame Kit for Fume Hoods

Lee Engineering 8 Foot, Aluminum, Back Mount Lab-Frame Kit for Fume Hoods #ad - Chamfered ends. Rods are corrosion-resistant they will not corrode or rust. Aluminum lattice rod. Frame measures 36″ x 86″ fits most 8′ fume hoods.

 

Cole-Parmer Ducted Wall Canopy Fume Hood 36 W #ad

Cole-Parmer Ducted Wall Canopy Fume Hood, 36″ W

Cole-Parmer Ducted Wall Canopy Fume Hood, 36″ W #ad - Constructed of chemical-resistant composite materials, these molded, one-piece canopy hoods are lightweight and designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with baths and circulators, small mixers, hot plates, or other equipment. Island hoods require mounting kit 33731-85 which includes four 10-ft (3 m) long suspension rods. Exhaust blower not included. Side panels attach directly to side of hood and help to contain fumes and minimize effects of cross drafts. Other rod lengths are available — contact an application specialist for more information. Easily incorporate into existing labs and classrooms. Wall and corner hoods come with installation hardware. To customize your canopy hood, order clear fiberglass side panels separately below. Note canopy hoods require exhausting to the outside or into existing ventilation. Capture and eliminate contaminated air at the source choose from wall, island, or corner styles. If your application requires hood material of 304 stainless steel, contact our application specialists. Vapor-proof incandescent light fixture 33731-88 adds additional light to your working area and mounts easily to the inside of your canopy.

 

Vented Enclosure Fume Hood - 2 Foot #ad

Vented Enclosure Fume Hood – 2 Foot

Vented Enclosure Fume Hood – 2 Foot #ad - The fume extractor should be installed in a well ventilated room. The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow. External dimensions 24 w x 28 d x 195 inches h. For use with menda model 35440 and 35445 fume extractors. Flexiable arm used to vaccum fumes and vapors.

 

Purair Basic P5-24 Ductless Fume Hood 2 Wide #ad

Purair Basic P5-24 Ductless Fume Hood, 2′ Wide

Purair Basic P5-24 Ductless Fume Hood, 2′ Wide #ad - Carbon and hepa filters available to handle a variety of chemical vapors and/or particulates (sold separately). Not ductwork or make up air requirements. Easy to operate controls. Operates on a standard 110v, 60hz outlet. Includes vapor proof fluorescent lighting, cable pass through ports and low airflow alarm.

 

Supreme 20 Compact Work Table with Fume Extraction #ad

Supreme 20 Compact Work Table with Fume Extraction

Supreme 20 Compact Work Table with Fume Extraction #ad - Supreme 20 fume extraction table. A compact work table with integrated glue and other heavier than air fume extraction. Features • electric regulated air control • 4″ exhaust vent • top with 2 storage shelves • rounded off cavities for safe support of shoes • perforated steel table top • 2 storage shelves for tools or supplies.

 

TrippNT 50316 Polyethylene Fume Hood Shelf 48 Width x 8 Height x 5 Depth 4 White #ad

TrippNT 50316 Polyethylene Fume Hood Shelf, 48″ Width x 8″ Height x 5″ Depth, 4′, White

TrippNT 50316 Polyethylene Fume Hood Shelf, 48″ Width x 8″ Height x 5″ Depth, 4′, White #ad - Ideal for use in the hood, contamination box or bench top. Back cut outs allow laminar flow, keeps items off hood floor or step over smaller items. 48 x 8 x 5 inches (width height depth) 5 pounds. 4 foot shelf designed to hold, contain, and store supplies in the hood or on the bench. White polyethylene plastic construction with open back to allow air flow.

 

Purair Advanced Fume Hood - 25 Foot #ad

Purair Advanced Fume Hood – 2.5 Foot

Purair Advanced Fume Hood – 2.5 Foot #ad - Electrostatic pre-filter the a 99. Electrical cords and cables are safely routed into the cabinet through ports on the back and side walls a filtered air sampling port allows manual filter monitoring. Electronic controls and displays include switches for the blower and lights, an electronic hour counter and low airflow alarm,. 5% effective electrostatic pre-filter is accessible from inside the chamber to contain the release of any particulates that it traps. The purair advanced series ductless fume hoods are a series of high efficiency products designed to protect the user and the environment from hazardous vapors generated on the work surface. The pre-filter can be changed while the unit is operating to prevent operator exposure to chemical vapors. Sold separately is one required main filters (astm-001, astm-013, astm-015, astm-030, astm-200, or astm-100 depending on application). At the heart of the purair fume hood product line is the innovative air science multiplex filtration technology. Steel support frame the chemical resistant epoxy coated steel frame adds mechanical strength. Dynamic filtration chamber the dynamic filter chamber prevents any possible leakage of contaminated air by pressurizing the fan plenum (positive air) and depressuring the filter compartment (negative air). Included are analog air velocity meter in the field of vision of the user provides independent backup to the electronic airflow alarm. Double hinged self locking front sash when closed, the cabinet sash protects the operator with 100 fpm airflow. A continuous air velocity monitoring system alerts the operator upon unacceptable values. Filter door key filter access keys prevent unauthorized removal or accidental exposure to dirty filters.

 

Menda 35455 Flexible Arm 50mm Diameter For Solo and Duo Fume Extraction #ad

Menda 35455 Flexible Arm, 50mm Diameter, For Solo and Duo Fume Extraction

Menda 35455 Flexible Arm, 50mm Diameter, For Solo and Duo Fume Extraction #ad - The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow. The fume extractor should be installed in a well ventilated room. Replacement parts for items included as part of the menda 35440 fume extractor kit. Flexiable arm used to vaccum fumes and vapors. For use with menda model 35440 and 35445 fume extractors.

 

Menda 35440 Portable Solo Fume Extractor Complete Unit Kit 53 CFM with Filter #ad

Menda 35440 Portable Solo Fume Extractor Complete Unit Kit, 53 CFM with Filter

Menda 35440 Portable Solo Fume Extractor Complete Unit Kit, 53 CFM with Filter #ad - 53 cfm with filter. Gas and hepa filter. Combined filter surface area 2. 3µ, impregnated carbon. Comprehensive filter system – hepa filtration 99. 3 microns. 3a (0. Maximum number of operators 1. Noise level 54dba. The kit includes one each of menda solo extractor with one inlet, 30″ esd stay put extraction arm with nozzle, 5′ 50mm flex hose, flip top flush seal mounting plate, table bracket installation kit, sleeve, 6’ power cord, combined filter (hepa), pre-filter and 2 jubilee clips. Full load current 0. Electrical supply 230v 1ph 50hz (110v 1ph 60hz). 06 m square, efficiency f7 85 percent at 0. Exhauster centrifugal fan. 997 percent at 0. 8µ. 0 m square, efficiency h13 99. 65a). Pre-filter surface area 0. Dimensions 15″ height by 10″ width by 10″ depth. Duct run 9. Filter indicator light. Rated output 60w (65w). 5 feet. 997 percent effective to 0. Duct size 50mm.

 

Menda 35450 Pre-Filter For Solo and Duo Fume Extractor Pack of 5 #ad

Menda 35450 Pre-Filter, For Solo and Duo Fume Extractor (Pack of 5)

Menda 35450 Pre-Filter, For Solo and Duo Fume Extractor (Pack of 5) #ad - Pre-filter for use with the menda 35440 and 35445 fume extractors. The pre-filter is intended to capture larger particulate matter, and should be used with a hepa combined filter to reach greater levels of filtration.

 

Erlab Captair FLOW 32 Laminar Ductless Fume Hood 230V #ad

Erlab Captair FLOW 32″ Laminar Ductless Fume Hood, 230V

Erlab Captair FLOW 32″ Laminar Ductless Fume Hood, 230V #ad - Provides an ultra-clean, dust-free environment hepa filter included with cabinet. The flow cabinet is equipped with a blower and to handle an h14 hepa filter that has an efficiency of 99. Cabinet also features two side panel utility ports to run electrical or fluid lines into the enclosure. The cabinet allows you to perform handlings in an ultra-clean, dust-free environment. The hood protects the sample or product in the hood from contamination by using an h14 hepa filter to capture dust and particulates from the lab air before it flows down onto the samples or products in the hood. Order replacement filter 33520-26, separately. 1 microns. 4 m) cord with plug. Front-mounted control panel continuously monitors ventilation flow rate and alerts you via visable and audible alarm in the event of ventilation failure. What’s included side utility ports, and 8-ft (2. Cabinet can be used with non-pathogenic or non-harmful materials, such as non-pathogenic cell culture or vitro culture. 995 percent for particles larger than 0.

 

Filter for Purair 5 Ductless Fume Hood GP Plus #ad

Filter for Purair 5 Ductless Fume Hood GP Plus

Filter for Purair 5 Ductless Fume Hood GP Plus #ad - From our beginnings in 1927, carolina biological supply company has grown to become a leading supplier of science teaching materials for all levels of education today, from our headquarters in burlington, north carolina, we serve customers worldwide, including teachers, professors, homeschool educators, hobbyists, and professionals in health and science-related fields. The carolina pledge 100% satisfaction guaranteed all of our products are unconditionally guaranteed if for any reason you are not satisfied with any item, you may return it for a replacement, a refund, or credit it’s that simple. When you shop with carolina, you’re not alone all of our products are backed by unparalleled technical support, available from 8am to 8pm, et, monday-friday contact information (live chat, email, and phone) is provided after placing your order at amazon.

 

Bel-Art H50000-2002 Polyethylene Observation Fume Hood 27 x 13 x 22 in #ad

Bel-Art H50000-2002 Polyethylene Observation Fume Hood; 27 x 13 x 22 in.

Bel-Art H50000-2002 Polyethylene Observation Fume Hood; 27 x 13 x 22 in. #ad - Overall dimensions are 27″ length by 13″ width by 22″ height back, stationary window is 20″ width by 11″ height shipping weight 181kg (40 lbs). Lightweight and economical, this hood has clear polycarbonate windows which are stronger than acrylic, wipe clean with a damp cloth, and provide excellent visualization in a group setting. The front sash opens to three adjustable positions for air flow control the hood’s polyethylene surface is chemical resistant and easy to clean. Stepped exhaust duct will accept either a 4″ or 6″ diameter duct an exhaust system capable of drawing 200 cfm (free air) is recommended.

 

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit 125 CFM with Filter #ad

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit, 125 CFM with Filter

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit, 125 CFM with Filter #ad - Filter indicator light yes, cfm with filter 125. The kit includes 1 menda duo extractor with two inlets, two 30″ esd stay put extraction arm with nozzle, two 5′ 50mm flex hose, 2 flip top flush seal mounting plate, 2 table bracket installation kit, 4 jubilee clips, 2 sleeves, 1 black inlet cover, one 6’ power cord, 1 combined filter (hepa), 1 pre-filter. Maximum number of operators 2. Dimensions 15″ height by 10″ width by 10″ depth. Noise level.

 

Lee Engineering Fume Hood Back Mounting Kit aluminum 4 Foot #ad

Lee Engineering Fume Hood Back Mounting Kit (aluminum, 4 Foot)

Lee Engineering Fume Hood Back Mounting Kit (aluminum, 4 Foot) #ad - This mounting option is great for situations when you don’t need a lab support lattice to cover the entire back panel of your fume hood. Aluminum back mounting kit includes (4) 4” aluminum rods, (4) zinc connectors and (4) zinc vertical base plates. This kit is intended for a 4′ fume hood.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.