Best 19 Electroporation Cuvettes

 

Bio-Rad 165-2083 Gene Pulser Micro Pulser Electroporation Cuvettes 01 cm Electrode Gap Pack of 5

Bio-Rad 165-2083 Gene Pulser Micro Pulser Electroporation Cuvettes, .01 cm Electrode Gap, Pack of 5

Bio-Rad 165-2083 Gene Pulser Micro Pulser Electroporation Cuvettes, .01 cm Electrode Gap, Pack of 5 - 1 cm (brown cap), for bacteria and yeast, 0. Gene pulser/micropulser cuvettes are available in three gap widths 0. These high-quality cuvettes are compatible with most electroporation systems, including bio-rad’s gene pulser mxcelltm, gene pulser xcelltm, and micropulser electroporators. 4 cm (blue cap), for mammalian cells, including primary and stem cells, or plant protoplasts. 2 cm (green cap), for bacteria, yeast, and mammalian cells, including primary and stem cells, 0. Use the 0. 1 cm-gap gene pulser/micropulser electroporation cuvettes for reproducible transformation of bacteria, yeast, and mammalian cells, including primary and stem cells.

 

Eppendorf 940001013 Plastic Electroporation Cuvette with 2mm Gap 400microliter Capacity Sterile Pack of 50

Eppendorf 940001013 Plastic Electroporation Cuvette with 2mm Gap, 400microliter Capacity, Sterile (Pack of 50)

Eppendorf 940001013 Plastic Electroporation Cuvette with 2mm Gap, 400microliter Capacity, Sterile (Pack of 50) - Eppendorf # 940001013. 50/pack. Eppendorf electroporation 400microliter cuvettes are manufactured clear plastich with aluminum electrodes and a 1mm gap width. They are individually wrapped and gamma-irradiated to ensure sterility, design ensures correct positioning in the cuvette holder, gap width marked on the side of every cuvette to simplify identification, frosted area permits easy labeling.

 

Gel Company Electroporation Cuvette Chiller ECC100-12

Gel Company Electroporation Cuvette Chiller, ECC100-12

Gel Company Electroporation Cuvette Chiller, ECC100-12 - If the cuvette is placed directly on ice, cells can freeze and die. The block conforms to sbs footprint, and contains holes for inserting standard lab thermometers. The chiller holds up to 12 cuvettes inside a thermoconductive block for rapid cooling. If the cuvettes are kept at room temperature, cells may change their physiological state. The electroporation chiller maintains a temperature of 2 to 8 degrees c when placed on ice, enabling you to work with the cuvettes at the lab bench near the electroporation unit. Prior to electroporation, it is important to keep cells at the correct temperature. This unit accepts both keyed and standard cuvettes. The entire block surface is anodized to be durable, reusable, and easy to clean.

 

Gel Company Electroporation Cuvettes 4mmLong Sterile 50Pk EPC104-50

Gel Company Electroporation Cuvettes, 4mm/Long, Sterile, 50/Pk, EPC104-50

Gel Company Electroporation Cuvettes, 4mm/Long, Sterile, 50/Pk, EPC104-50 - Maximize molecular electroporation and electrofusion efficiencies. 4 mm gap, long electrode, 50/pk gel company manufactures replacement parts for brand name electrophoresis systems and other life science instruments. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. Compatible with bio-rad®’s genepulser®/ micropulsertm/xcelltm cuvettes and most electroporation systems. Designed for bacteria, yeast, insect, plant and mammalian cells. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. We are not authorized resellers for brand name parts, but rather make our own products to fit in these systems and offer them at a lower cost.

 

Gel Company Electroporation Cuvettes 2 mmShort Sterile 50Pk EPC002-50

Gel Company Electroporation Cuvettes, 2 mm/Short, Sterile, 50/Pk, EPC002-50

Gel Company Electroporation Cuvettes, 2 mm/Short, Sterile, 50/Pk, EPC002-50 - Designed for bacteria, yeast, insect, plant and mammalian cells. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. We are not authorized resellers for brand name parts, but rather make our own products to fit in these systems and offer them at a lower cost. All 1 mm and 2 mm cuvettes have tapered v bottom to minimize dead volumes. Compatible with bio-rad®’s genepulser®/micropulsertm cuvettes and most electroporation systems. 1 mm gap, short elecrode, 50/pk gel company manufactures replacement parts for brand name electrophoresis systems and other life science instruments. Maximize molecular electroporation and electrofusion efficiencies. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements.

 

Lee Plastic 1040-04 Disposable Universal Electroporation Cuvette with 4mm Red Cap Individually Wrapped Sterile

Lee Plastic 1040-04 Disposable Universal Electroporation Cuvette with 4mm Red Cap, Individually Wrapped, Sterile

Lee Plastic 1040-04 Disposable Universal Electroporation Cuvette with 4mm Red Cap, Individually Wrapped, Sterile - Polished aluminum plates reduce static and arcing. Compatible with most electroporation devices. Hermetically sealed sterile packaging. Manufactured from high quality polycarbonate material. Precision build.

 

Electroporation Cuvette 01cm 50 Pieces per bag

Electroporation Cuvette 0.1cm (50 Pieces per bag)

Electroporation Cuvette 0.1cm (50 Pieces per bag) - Scratch-free surface for uniform pulse delivery to the entire sample. 1mm cuvete has a field strength of up to 25kv/cm for high efficiency transformation of e coli. High-grade aluminum electrodes, fit most electroporators. 2mm cuvette has a field strength of up to 125kv/cm for transformation of yeast cells. Cuvettes are available in three gap widths 1mm, 2mm and 4mm to deliver the proper field strength to a variety of cell types.

 

Gel Company Electroporation Cuvettes 4mmLong Sterile 5Pk EPC104-5

Gel Company Electroporation Cuvettes, 4mm/Long, Sterile, 5/Pk, EPC104-5

Gel Company Electroporation Cuvettes, 4mm/Long, Sterile, 5/Pk, EPC104-5 - Designed for bacteria, yeast, insect, plant and mammalian cells. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. 4 mm gap, long electrode, 5/pk. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. Maximize molecular electroporation and electrofusion efficiencies. Compatible with bio-rad®’s genepulser®/ micropulsertm/xcelltm cuvettes and most electroporation systems.

 

Electroporation Cuvette 2mm Sterile Individ Wrapped 50 CuvettesUnit

Electroporation Cuvette 2mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit

Electroporation Cuvette 2mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit - Cuvettes are available in three gap widths 1mm, 2mm and 4mm to deliver the proper field strength to a variety of cell types. Scratch-free surface for uniform pulse delivery to the entire sample. 2mm cuvette has a field strength of up to 125kv/cm for transformation of yeast cells. 1mm cuvete has a field strength of up to 25kv/cm for high efficiency transformation of e coli. High-grade aluminum electrodes, fit most electroporators.

 

Gel Company Electroporation Cuvettes 1 mmLong Sterile 5Pk EPC101-5

Gel Company Electroporation Cuvettes, 1 mm/Long, Sterile, 5/Pk, EPC101-5

Gel Company Electroporation Cuvettes, 1 mm/Long, Sterile, 5/Pk, EPC101-5 - 1mm cuvete has a field strength of up to 25kv/cm for high efficiency transformation of e coli. Gel, electroporation cuvettes- 1 mm/long- sterile , pk5. Cuvettes are available in three gap widths 1mm, 2mm and 4mm to deliver the proper field strength to a variety of cell types. 2mm cuvette has a field strength of up to 125kv/cm for transformation of yeast cells. Scratch-free surface for uniform pulse delivery to the entire sample.

 

1 mm Electroporation Cuvette with Long Electrode

1 mm Electroporation Cuvette with Long Electrode

1 mm Electroporation Cuvette with Long Electrode - Low dead volumes with tapered v bottom. Cuvettes are compatible with most electroporation systems. Sterile packaged.

 

Eppendorf 940001021 Plastic Electroporation Cuvette with 4mm Gap 800microliter Capacity Sterile Pack of 50

Eppendorf 940001021 Plastic Electroporation Cuvette with 4mm Gap, 800microliter Capacity, Sterile (Pack of 50)

Eppendorf 940001021 Plastic Electroporation Cuvette with 4mm Gap, 800microliter Capacity, Sterile (Pack of 50) - Eppendorf electroporation 800microliter cuvettes are manufactured clear plastich with aluminum electrodes and a 4mm gap width. Eppendorf # 940001021. They are individually wrapped and gamma-irradiated to ensure sterility, design ensures correct positioning in the cuvette holder, gap width marked on the side of every cuvette to simplify identification, frosted area permits easy labeling.

 

Electroporation Cuvette 1mm Sterile Individ Wrapped 50 CuvettesUnit

Electroporation Cuvette 1mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit

Electroporation Cuvette 1mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit - High-grade aluminum electrodes, fit most electroporators. Scratch-free surface for uniform pulse delivery to the entire sample. Cuvettes are available in three gap widths 1mm, 2mm and 4mm to deliver the proper field strength to a variety of cell types. 2mm cuvette has a field strength of up to 125kv/cm for transformation of yeast cells. 1mm cuvete has a field strength of up to 25kv/cm for high efficiency transformation of e coli.

 

GEL - Electroporation cuvettes- 1 mmlong- sterile  PK500

GEL – Electroporation cuvettes- 1 mm/long- sterile , PK500

GEL – Electroporation cuvettes- 1 mm/long- sterile , PK500 - All 1 mm and 2 mm cuvettes have tapered v bottom to minimize dead volumes. Designed for bacteria, yeast, insect, plant and mammalian cells. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. 1 mm gap, long elecrode, 500/pk. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. Compatible with bio-rad®’s genepulser®/micropulsertm/xcelltm cuvettes and most electroporation systems. Maximize molecular electroporation and electrofusion efficiencies.

 

GEL - Electroporation cuvettes- 2 mmlong- sterile  PK500

GEL – Electroporation cuvettes- 2 mm/long- sterile , PK500

GEL – Electroporation cuvettes- 2 mm/long- sterile , PK500 - All 1 mm and 2 mm cuvettes have tapered v bottom to minimize dead volumes. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. Designed for bacteria, yeast, insect, plant and mammalian cells. 1 mm gap, long elecrode, 500/pk. Compatible with bio-rad®’s genepulser®/micropulsertm/xcelltm cuvettes and most electroporation systems. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. Maximize molecular electroporation and electrofusion efficiencies.

 

2 mm Electroporation Cuvette with Long Electrode

2 mm Electroporation Cuvette with Long Electrode

2 mm Electroporation Cuvette with Long Electrode - Cuvettes are compatible with most electroporation systems. Sterile packaged. Low dead volumes with tapered v bottom.

 

Electroporation Cuvette 4mm Sterile Individ Wrapped 50 CuvettesUnit

Electroporation Cuvette 4mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit

Electroporation Cuvette 4mm, Sterile, Individ. Wrapped, 50 Cuvettes/Unit - 1mm cuvete has a field strength of up to 25kv/cm for high efficiency transformation of e coli. Cuvettes are available in three gap widths 1mm, 2mm and 4mm to deliver the proper field strength to a variety of cell types. High-grade aluminum electrodes, fit most electroporators. Scratch-free surface for uniform pulse delivery to the entire sample. 2mm cuvette has a field strength of up to 125kv/cm for transformation of yeast cells.

 

Gel Company Electroporation Cuvettes 2 mmLong Sterile 50Pk EPC102-50

Gel Company Electroporation Cuvettes, 2 mm/Long, Sterile, 50/Pk, EPC102-50

Gel Company Electroporation Cuvettes, 2 mm/Long, Sterile, 50/Pk, EPC102-50 - 1 mm gap, long elecrode, 50/pk gel company manufactures replacement parts for brand name electrophoresis systems and other life science instruments. Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. Maximize molecular electroporation and electrofusion efficiencies. All 1 mm and 2 mm cuvettes have tapered v bottom to minimize dead volumes. We are not authorized resellers for brand name parts, but rather make our own products to fit in these systems and offer them at a lower cost. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. Designed for bacteria, yeast, insect, plant and mammalian cells. Compatible with bio-rad®’s genepulser®/micropulsertm/xcelltm cuvettes and most electroporation systems.

 

Gel Company Electroporation Cuvettes 1 mmShort Sterile 50Pk EPC001-50

Gel Company Electroporation Cuvettes, 1 mm/Short, Sterile, 50/Pk, EPC001-50

Gel Company Electroporation Cuvettes, 1 mm/Short, Sterile, 50/Pk, EPC001-50 - Each batch of cuvettes are quality tested for optimal and reproducible impedance measurements. Cap design enables improved aseptic handling techniques, while the lip and positive seal reduces possible contamination. Designed for bacteria, yeast, insect, plant and mammalian cells. All 1 mm and 2 mm cuvettes have tapered v bottom to minimize dead volumes. Compatible with bio-rad®’s genepulser®/micropulsertm cuvettes and most electroporation systems. We are not authorized resellers for brand name parts, but rather make our own products to fit in these systems and offer them at a lower cost. 1 mm gap, short elecrode, 50/pk gel company manufactures replacement parts for brand name electrophoresis systems and other life science instruments. Maximize molecular electroporation and electrofusion efficiencies.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.