Best 22 Glass Centrifuge Tubes

 

Kimble Conical-Bottom Glass Centrifuge Tubes Capacity 125mL capacity OD x L 17 x 118mm VendorVendor No Kimble 45170-125

Kimble Conical-Bottom Glass Centrifuge Tubes, Capacity: 12.5mL capacity; O.D. x L: 17 x 118mm; Vendor/Vendor No.: Kimble 45170-125

Kimble Conical-Bottom Glass Centrifuge Tubes, Capacity: 12.5mL capacity; O.D. x L: 17 x 118mm; Vendor/Vendor No.: Kimble 45170-125 - Capacity 12 5ml capacity o d x l 17 x 118mm vendor/vendor no kimble 45170-125.

 

L-K Industries S10B2AV15 Borosilicate Glass Centrifuge Tubes Pear Shaped Model B 200 Actual Verified 7 Height 100 cu ft Capacity Pack of 6

L-K Industries S10B2AV15 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 200%, Actual Verified, 7″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10B2AV15 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 200%, Actual Verified, 7″ Height, 100 cu. ft. Capacity (Pack of 6) - Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Goetz-type 58mm borosilicate 100ml glass bulb oil centrifuge tube is a pear shaped tube, but it has a lower stem calibrated to hold 15ml specified in astm method d 96 as suitable for a number of tests on petroleum products reference no astm d 96. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on.

 

Glas-Col 099A SR850 50ml Glass Centrifuge Tube Holder for Shakers

Glas-Col 099A SR850 50ml Glass Centrifuge Tube Holder for Shakers

Glas-Col 099A SR850 50ml Glass Centrifuge Tube Holder for Shakers - 27 kg) and need not be balanced. Each holder accommodates up to eight tubes. If sizes other than those listed in the table are needed, call us with your requirements. The total load may be up to five pounds (2. The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Maximum of three holders can be shaken at one time.

 

Corning Pyrex Borosilicate Glass Cylindrical Conical Bottom Disposable Centrifuge Tubes without Screw Cap 5ml Capacity Case of 125

Corning Pyrex Borosilicate Glass Cylindrical Conical Bottom Disposable Centrifuge Tubes without Screw Cap, 5ml Capacity (Case of 125)

Corning Pyrex Borosilicate Glass Cylindrical Conical Bottom Disposable Centrifuge Tubes without Screw Cap, 5ml Capacity (Case of 125) - These disposable 5ml pyrex glass centrifuge tubes are manufactured from type i borosilicate glass and have a gpi 13-415 thread. 9999-132, for reusable phenolic screw caps with polytetrafluorethylene (ptfe) faced rubber liners see no. 99999-13. They are supplied without caps. For reusable phenolic screw caps with white rubber liners, see no. The tubes are designed to withstand centrifugation up to 3,000 rcf and are packed in convenient, easy to use packs, which are shrink-sealed for protection during shipment. 9998-13, for disposable phenolic screw cap with rubber liner, see no.

 

Pyrex Round-Bottom Glass Centrifuge Tubes Centrifuge Tube Capacity 50mL OD x L 29 x 122mm

Pyrex Round-Bottom Glass Centrifuge Tubes, Centrifuge Tube, Capacity: 50mL, O.D. x L: 29 x 122mm

Pyrex Round-Bottom Glass Centrifuge Tubes, Centrifuge Tube, Capacity: 50mL, O.D. x L: 29 x 122mm - Made of borosilicate glass. Size25ml. Conical shape. Without graduations.

 

L-K Industries S12D Borosilicate Glass Short Cone Centrifuge Tubes Model D Extra Marking 6 Height 100 cu ft Capacity Pack of 6

L-K Industries S12D Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, Extra Marking, 6″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S12D Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, Extra Marking, 6″ Height, 100 cu. ft. Capacity (Pack of 6) - Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. Tubes conform to astm & api standards, meaning they can be used in most regulatory environments. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market.

 

Glas-Col 099A SR815 15ml Glass Centrifuge Tube Holder for Shakers

Glas-Col 099A SR815 15ml Glass Centrifuge Tube Holder for Shakers

Glas-Col 099A SR815 15ml Glass Centrifuge Tube Holder for Shakers - If sizes other than those listed in the table are needed, call us with your requirements. Maximum of three holders can be shaken at one time. 27 kg) and need not be balanced. The total load may be up to five pounds (2. Each holder accommodates up to eight tubes. The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate.

 

L-K Industries S10D2THD Borosilicate Glass Short Cone Centrifuge Tubes Model D 200 Threaded 6 Height 100 cu ft Capacity Pack of 6

L-K Industries S10D2THD Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, Threaded, 6″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10D2THD Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, Threaded, 6″ Height, 100 cu. ft. Capacity (Pack of 6) - Tubes conform to astm & api standards, meaning they can be used in most regulatory environments. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on.

 

Thomas 2598G15 Shevsky-Stafford Type Borosilicate Glass Centrifuge Tube 65mL Capacity Case of 12

Thomas 2598G15 Shevsky-Stafford Type Borosilicate Glass Centrifuge Tube, 6.5mL Capacity (Case of 12)

Thomas 2598G15 Shevsky-Stafford Type Borosilicate Glass Centrifuge Tube, 6.5mL Capacity (Case of 12) - Convenient to use. Easy to read.

 

Beyondsupply-Lab Glass Centrifuge Tube graduated 25ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 25ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 25ml new - Glass centrifuge tube graduated 25ml new. Size25ml. Conical shape. Made of borosilicate glass.

 

L-K Industries S10B Borosilicate Glass Centrifuge Tubes Pear Shaped Model B 100 mL 7 Height 100 cu ft Capacity Pack of 6

L-K Industries S10B Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 100 mL, 7″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10B Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 100 mL, 7″ Height, 100 cu. ft. Capacity (Pack of 6) - Goetz-type 58mm borosilicate 100ml glass bulb oil centrifuge tube is a pear shaped tube, but it has a lower stem calibrated to hold 15ml specified in astm method d 96 as suitable for a number of tests on petroleum products reference no astm d 96. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market.

 

Glass centrifuge tubes  Tapered base - no rating 15ml 10 pieces

Glass centrifuge tubes , Tapered base – no rating 15ml 10 pieces

Glass centrifuge tubes , Tapered base – no rating 15ml 10 pieces - Glass centrifuge tubes. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Tubes conform to astm & api standards, meaning they can be used in most regulatory environments. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production.

 

L-K Industries S10DTHDFV15 Borosilicate Glass Short Cone Centrifuge Tubes Model D Threaded Factory Verified 6 Height 100 cu ft Capacity Pack of 6

L-K Industries S10DTHDFV15 Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, Threaded, Factory Verified, 6″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10DTHDFV15 Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, Threaded, Factory Verified, 6″ Height, 100 cu. ft. Capacity (Pack of 6) - In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. Tubes conform to astm & api standards, meaning they can be used in most regulatory environments. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on.

 

Beyondsupply-Lab Glass Centrifuge Tube graduated 50ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 50ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 50ml new - Made of borosilicate glass. Size50ml. Lab glass centrifuge tube graduated 50ml. Conical shape.

 

L-K Industries S10D2 Borosilicate Glass Short Cone Centrifuge Tubes Model D 200 6 Height 100 cu ft Capacity Pack of 6

L-K Industries S10D2 Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, 6″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10D2 Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, 6″ Height, 100 cu. ft. Capacity (Pack of 6) - In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Tubes conform to astm & api standards, meaning they can be used in most regulatory environments. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability.

 

Beyondsupply-Lab Glass Centrifuge Tube with stopper graduated 10ml new

Beyondsupply-Lab Glass Centrifuge Tube with stopper graduated 10ml new

Beyondsupply-Lab Glass Centrifuge Tube with stopper graduated 10ml new - Made of borosilicate glass. Glass centrifuge tube graduated 10ml new. Size10ml conical shape with glass stopper. Clear.

 

Beyondsupply-Lab Glass Centrifuge Tube graduated 5ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 5ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 5ml new - Glass centrifuge tube graduated 5ml new. Clear. Made of borosilicate glass. Size5ml conical shape.

 

Beyondsupply-Lab Glass Centrifuge Tube graduated 15ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 15ml new

Beyondsupply-Lab Glass Centrifuge Tube graduated 15ml new - Clear. Glass centrifuge tube graduated 15ml new. Made of borosilicate glass. Size15ml conical shape.

 

Sigma 15100 Accessory Replacement glass centrifuge tube

Sigma 15100 Accessory Replacement glass centrifuge tube

Sigma 15100 Accessory Replacement glass centrifuge tube - Product type- centrifuge tube. Accessory replacement glass centrifuge tube. Country of origin- germany.

 

L-K Industries S10B2 Borosilicate Glass Centrifuge Tubes Pear Shaped Model B 200 7 Height 100 cu ft Capacity Pack of 6

L-K Industries S10B2 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 200%, 7″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10B2 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, 200%, 7″ Height, 100 cu. ft. Capacity (Pack of 6) - Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Goetz-type 58mm borosilicate 100ml glass bulb oil centrifuge tube is a pear shaped tube, but it has a lower stem calibrated to hold 15ml specified in astm method d 96 as suitable for a number of tests on petroleum products reference no astm d 96. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market.

 

L-K Industries S10D2WTHD Borosilicate Glass Short Cone Centrifuge Tubes Model D 200 Wide Threaded 6 Height 100 cu ft Capacity Pack of 6

L-K Industries S10D2WTHD Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, Wide Threaded, 6″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10D2WTHD Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, Wide Threaded, 6″ Height, 100 cu. ft. Capacity (Pack of 6) - Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production. Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Tubes conform to astm & api standards, meaning they can be used in most regulatory environments.

 

L-K Industries S10BFV15 Borosilicate Glass Centrifuge Tubes Pear Shaped Model B Factory Verified 100 mL 7 Height 100 cu ft Capacity Pack of 6

L-K Industries S10BFV15 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, Factory Verified, 100 mL, 7″ Height, 100 cu. ft. Capacity (Pack of 6)

L-K Industries S10BFV15 Borosilicate Glass Centrifuge Tubes, Pear Shaped, Model “B”, Factory Verified, 100 mL, 7″ Height, 100 cu. ft. Capacity (Pack of 6) - Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability. Each tube has a unique serial number to ensure tracability and also has a sand spot to write on. Goetz-type 58mm borosilicate 100ml glass bulb oil centrifuge tube is a pear shaped tube, but it has a lower stem calibrated to hold 15ml specified in astm method d 96 as suitable for a number of tests on petroleum products reference no astm d 96. In addition to our factory volumetric calibration, lk industries offers gravametric calibrations at competetive pricing our tube are the most accurate on the market. Tubes are rigorously tested for adherence to astm and api standards we also use magnifying techniques to ensure there is no weakness in the glass prior to production.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.