Best and Coolest 19 Retort Stands in 2019

 

KINGSO Education Lab Retort Stand Support Metalware Set Including 18x115cm Base 3 Rings and 3 Clamps

KINGSO Education Lab Retort Stand Support Metalware Set Including 18×11.5cm Base, 3 Rings and 3 Clamps

KINGSO Education Lab Retort Stand Support Metalware Set Including 18×11.5cm Base, 3 Rings and 3 Clamps - Specification material iron size length of pole 60cm/23., Used in conjunction with alcohol lamp. 08×4. 52in (detail of size will be shown in the picture) package weight 3kg package includes 1 base 1 iron pillar 1 triangular clip 2 beakers clip 3 rings 3 cross clip features, great for physics and chemistry experiment, the iron stand for fixing and supporting a variety of instruments, commonly used in filtration, heating experiment. Simple apparatus for laboratory chemical reactions. 62in base 18×11. Please ignore the tag size comes with the cloth. The tag size sometimes can be a larger than our description size. 5cm/7. Note, all dimensions are measured by hand, there may be 2-3cm deviations.

 

Metal Retort Stand Base 65 x 4 16x10cm Eisco Labs Premium Metalware

Metal Retort Stand Base, 6.5″ x 4″ (16x10cm) Eisco Labs Premium Metalware

Metal Retort Stand Base, 6.5″ x 4″ (16x10cm) Eisco Labs Premium Metalware - Retort stand base measuring approximately 65″ x 4″. Metal base is sturdy and can secure heavy stand loads. Base is coated in epoxy to protect it from chemicals. Rubber strips on feet protect standing surface. Threaded opening can hold equipment approximately 6/16″ in diameter.

 

Sciencent Retort Stand 3 Support Ring set Premium Lab Metalware Equipment

Sciencent Retort Stand 3 Support Ring set. Premium Lab Metalware Equipment

Sciencent Retort Stand 3 Support Ring set. Premium Lab Metalware Equipment - Powder coated polished royal blue base measures 8″x5″ (lxw). Set contains 3 support rings for lab experiments with diameter 3″ 4″ 5″. Polished stainless steel corrosion resistant rod measures 24″. The rod comes with a a loose & small grip lever to properly screw it in the base. Padded base prevents scratches on the surface and maintains a much required grip during experiments.

 

Dynalon 502655 Center Weighted Lab Support with Base and RodRetort Stand 675 Length x 9875 Width x 2063 Height

Dynalon 502655 Center Weighted Lab Support with Base and Rod/Retort Stand, 6.75″ Length x 9.875″ Width x 2.063″ Height

Dynalon 502655 Center Weighted Lab Support with Base and Rod/Retort Stand, 6.75″ Length x 9.875″ Width x 2.063″ Height - It comes with a polyethylene coated metal rod which screws into the base. Rod diameter 12. 5lb. Center weighted.  Base dimensions 171 x 248 x 52mm (6-3/4 x 9-7/8 x 2-1/16 inch). It is available with the hole in the center or at the short edge (502665). 5mm. Dynalon® # 502655. This center weighted retort stand, is made of a polyethylene and weighs 5.

 

lieomo Mini High Retort Stands Metal Support Clamp Flask Laboratory Stand Set 30CM

lieomo Mini High Retort Stands Metal Support Clamp Flask Laboratory Stand Set 30CM

lieomo Mini High Retort Stands Metal Support Clamp Flask Laboratory Stand Set 30CM - Simple apparatus for laboratory chemical reactions. Package include 1 x lab retort stand. Features the iron stand for fixing and supporting a variety of instruments, commonly used in filtration, heating experiment. Is one of the most widely used instruments in experiments. Used in conjunction with alcohol lamp. Specifications material metal color silver,black rod length 29cm stand size 150 x 80 x 4mm composion base,iron rod,flask holder,siderosphere(with fixing clip) application it is suitable for the use of schools, factories, scientific research units, families, hospitals, laboratories, laboratory.

 

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand Two 25 mL Class A Burets and One White Finish Burette Clamp Pack of 3

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand, Two 25 mL Class A Burets and One White Finish Burette Clamp (Pack of 3)

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand, Two 25 mL Class A Burets and One White Finish Burette Clamp (Pack of 3) - Set of three vee gee burette products including two class a burets of borosilicate glass and ptfe stopcock, burette retort stand with non corrosive polystyrene base and polypropylene covered metallic rod and white finish double burette clamp.

 

4Pcs Lab Retort Stands Boss Head Clamps Holder Laboratory Metal Grip Support Frames

4Pcs Lab Retort Stands Boss Head Clamps Holder Laboratory Metal Grip Support Frames

4Pcs Lab Retort Stands Boss Head Clamps Holder Laboratory Metal Grip Support Frames - A laboratory iron slip,an usual clamp accessory in the lab. Size0-16mm. Made of zinc alloy,and it is 90 degree with screws,it is secure and easy to control it. Package included 4 x clamp holder.

 

Retort Stand base 8 x 5 200mm x 125mm height 24 600mm

Retort Stand base: 8″ x 5″ (200mm x 125mm); height: 24″ (600mm)

Retort Stand base: 8″ x 5″ (200mm x 125mm); height: 24″ (600mm) - A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment. Wide base offers a sturdy setup for your experiments.

 

Labappara Retort Stand

Labappara Retort Stand

Labappara Retort Stand - This retort stand has a 200 x 125 mm base. Made from enamel finished steel, base dimensions 200 x 125 mm height 600 mm rod. A retort stand, sometimes called a ring stand, is a piece of scientific equipment. The 3/8 plated-steel rod and can therefore be removed for easier storage. A exclusive product by labappara also visit wwwlabapparacom to know our wide range of products also you can reach us at [email protected] or +91-9467181717.

 

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs - Malab lab clamp holder 2 boss heads retort stand holder cast iron 2 pcscondition 100% brand new and high quality material cast iron diameter this holder can hold 0-16mmlength150mmweight 130 g package content 2 x lab clamp holderuse to hold a clamp in labs.

 

Sciencent Retort Stand with Clamp and Retort Ring Set Premium Lab Metalware Equipment

Sciencent Retort Stand with Clamp and Retort Ring Set. Premium Lab Metalware Equipment

Sciencent Retort Stand with Clamp and Retort Ring Set. Premium Lab Metalware Equipment - Set contains clamp and retort ring for lab experiments. Powder coated polished royal blue base measures 8″x5″ (lxw). Padded base prevents scratches on the surface and maintains a much required grip during experiments. The rod comes with a a loose & small grip lever to properly screw it in the base. Polished stainless steel corrosion resistant rod measures 24″.

 

Retort Stand base 6 x 4 150mm x 100mm height 20 500mm

Retort Stand base: 6″ x 4″ (150mm x 100mm); height: 20″ (500mm)

Retort Stand base: 6″ x 4″ (150mm x 100mm); height: 20″ (500mm) - A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment. Wide base offers a sturdy setup for your experiments.

 

Retort Stand base 12 x 7 300mm x 175mm height 30 750mm

Retort Stand base: 12″ x 7″ (300mm x 175mm); height: 30″ (750mm)

Retort Stand base: 12″ x 7″ (300mm x 175mm); height: 30″ (750mm) - A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment. Wide base offers a sturdy setup for your experiments.

 

Cast Iron Base Retort Stand - Heavy Duty - 8x5 - Eisco Labs

Cast Iron Base Retort Stand – Heavy Duty – 8×5″ – Eisco Labs

Cast Iron Base Retort Stand – Heavy Duty – 8×5″ – Eisco Labs - Eisco labs premium base offering is built of rugged powder coated cast iron and is chemical resistant. It is remarkably heavy duty and has a single 10×1. The unit measures 8×5″ and has a stable foundation comprised of 4 raised corners. 5mm metric threading.

 

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs - Malab lab clamp holder retort stand holder strong plastic 1 pcscondition 100% brand new and high quality material strong plastic diameter this holder can hold 0-19mmlength150mmweight 100 g package content 1 x lab clamp holderuse to hold a clamp in labs.

 

Eisco Labs Base H Shape Retort Stand 20cm X 20cm 3Kg

Eisco Labs Base “H” Shape Retort Stand; 20cm X 20cm; 3Kg

Eisco Labs Base “H” Shape Retort Stand; 20cm X 20cm; 3Kg - This is equipped thumb screw to be able to tighten down a rod that is installed. The sturdy 3kg “h” shape base retort stand provides a sturdy base for retort rods. Rod not included. The frame of this stand measures 1″ by 1″ thick cast iron. This stand is a very heavy duty durable stand that accepts 11-12 mm rods.

 

Steel Base Retort Stand - 2 Hole - 9x55 - Eisco Labs

Steel Base Retort Stand – 2 Hole – 9×5.5″ – Eisco Labs

Steel Base Retort Stand – 2 Hole – 9×5.5″ – Eisco Labs - 5mm metric thread tapped hole. 5″. One hole located center top of the base for standard ring stand use and the other centered along the long side for titrations and specific gravity determination. Beautiful and rugged 2 hole base retort stand constructed of 3mm thick steel from eisco labs. Sharp red finish adds character to otherwise bland lab setups. Measures 9×5. 10×1.

 

Steel Retort Stand - 2 Hole - 6x4 - Eisco Labs

Steel Retort Stand – 2 Hole – 6×4″ – Eisco Labs

Steel Retort Stand – 2 Hole – 6×4″ – Eisco Labs - Sharp red finish adds character to otherwise bland lab setups. 10×1. 5mm metric thread tapped hole. Measures 8×5″. Beautiful and rugged 2 hole base retort stand constructed of steel from eisco labs. One hole located center top of the base for standard ring stand use and the other centered along the long side for titrations and specific gravity determination.

 

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs - Malab lab clamp holder 2 boss heads retort stand holder 4 pcscondition 100% brand new and high quality material cast iron diameter this holder can hold 0-16mmlength150mmweight 200 g package content 4 x lab clamp holderuse to hold a clamp in labs.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.