Best and Coolest 22 Cold Finger Condensers in 2020

 

Chemglass CG-1222-04 Series CG-1222 Cold Finger Condenser 2942 Inner Joint 200 mm Length Below Joint

Chemglass CG-1222-04 Series CG-1222 Cold Finger Condenser, 29/42 Inner Joint, 200 mm Length Below Joint

Chemglass CG-1222-04 Series CG-1222 Cold Finger Condenser, 29/42 Inner Joint, 200 mm Length Below Joint - Hose connections have an o. D. Condenser has an inner joint and a sealed lower drip tip for drop control. Of 10mm at the middle serration.

 

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser 1420 Inner Joint 13 mm Length Below Joint

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint - The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Condenser for use in refluxing from 1 to 20ml of solvent in flasks having a capacity of 5 to 50ml. Minimal surface area provides for better yields while providing adequate cooling. Top hose connection is cooling inlet and middle hose connection is cooling outlet. Hose connection is 10mm at the largest serration. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size.

 

9720-23 - Cold Finger Condenser Microscale - Cold Finger Condenser Microscale Ace Glass Incorporated - Each

9720-23 – Cold Finger, Condenser, Microscale – Cold Finger, Condenser, Microscale, Ace Glass Incorporated – Each

9720-23 – Cold Finger, Condenser, Microscale – Cold Finger, Condenser, Microscale, Ace Glass Incorporated – Each - Microscale cold finger condenser with outside body diameter to fit two sizes of ace-thred bushings water connection tubing is 5mm o. Fabricated from borosilicate glass. D. Overall body length is approximately 200mm.

 

ACE GLASS 7807-06 Cold Finger Condenser 2425 Joints

ACE GLASS 7807-06 Cold Finger Condenser, 24/25 Joints

ACE GLASS 7807-06 Cold Finger Condenser, 24/25 Joints - Ace glass 7807-06 cold finger condenser, 24/25 joints, cold finger condenser for use with our 7756 series schleck reaction vessels.

 

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser Standard Taper 2440

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40 - Scientists rely on the expertise and artistic skills of wilmad-labglass’ engineers and glass specialists to manufacture nmr and epr consumables and laboratory glassware of the highest quality. Used daily in academia, healthcare and chemical, petroleum and other industrial applications, wilmad offers 7000+ items as part of their standard catalog as well as custom fabrication for individual glassware, glass repair services and oem glass parts. Made of borosilicate glass these distilling heads feature a removable cold finger condenser with a standard taper 29/42 inner. Thermometer joint is standard taper 10/30. Distilling heads have an upper standard taper 29/42 outer, a lower standard taper inner, and two stopcocks which are in the pressure equalizing line allowing receiver changes without interrupting the distillation.

 

Wilmad LG-17516-100 Cold Finger Condenser3520 Ball Joint1938 Outer Joint

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint - Replacement glassware for wg-ev311 rotary evaporators. Used daily in academia, healthcare and chemical, petroleum and other industrial applications, wilmad offers 7000+ items as part of their standard catalog as well as custom fabrication for individual glassware, glass repair services and oem glass parts. Scientists rely on the expertise and artistic skills of wilmad-labglass’ engineers and glass specialists to manufacture nmr and epr consumables and laboratory glassware of the highest quality.

 

Wilmad-LabGlass LG-5236-102 Cold Finger Condenser Standard Taper 1420

Wilmad-LabGlass LG-5236-102 Cold Finger Condenser, Standard Taper 14/20

Wilmad-LabGlass LG-5236-102 Cold Finger Condenser, Standard Taper 14/20 - They feature inner drip standard taper joint at the bottom, two hose connectors at the top for water inlet and outlet, and lower side hose connector for connection to vacuum/gas source. Minimal surface area provides better efficiency. Scientists rely on the expertise and artistic skills of wilmad-labglass’ engineers and glass specialists to manufacture nmr and epr consumables and laboratory glassware of the highest quality. Used daily in academia, healthcare and chemical, petroleum and other industrial applications, wilmad offers 7000+ items as part of their standard catalog as well as custom fabrication for individual glassware, glass repair services and oem glass parts. Compact design makes these borosilicate glass cold finger condensers suitable for microscale refluxing in flasks 5ml in capacity and larger.

 

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System 1420 Joint Size

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System, 14/20 Joint Size

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System, 14/20 Joint Size - Has two upper, glass, size a hose connections that take 5/16-inch tubing. Cold finger accessory for standard distilling heads and systems. Fits into 6606, 6609, and 6613 distillation heads. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation.

 

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint - Hose connections have an o. Of 10mm at the middle serration. D. Condenser has an inner joint and a sealed lower drip tip for drop control.

 

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 1420 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 14/20 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 14/20 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections - Made of high quality borosilicate glass 33,heavy wall design,made by hand-blowing to ensure uniform wall thickness,durable and reusable. With 14/20 inner joint between the hose connections and finger chamber,the length below the joint is 100mm. 100% 90 day money back guarantee simply return for a full refund,no question asked. A cold finger condenser is used to generate a cold surface on the immersion finger ,used in sublimation apparatus, reflux reaction or distillation apparatus. With two removable hose connections.

 

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 4038 for rotavap

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 40/38 for rotavap

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 40/38 for rotavap - Borosilicate glass 33 material & in stock(glass equipment). Dewar cold-finger condenser 300mm effective length id80mmod100mm joint 40/38 for rotavap.

 

Kemtech America C114250 Synthware Cold Finger Condenser Drip Tip 2440 Joint 250 mm Length Below Joint 10 mm Hose Connection

Kemtech America C114250 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 250 mm Length Below Joint, 10 mm Hose Connection

Kemtech America C114250 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 250 mm Length Below Joint, 10 mm Hose Connection - Ketch america c114250 synthase cold finger condenser, drip tip, 24/40 joint, 250mm length below joint, 10mm hose connection.

 

Laboy Glass Cold Finger Condenser Reflux Cold Trap 200mm in Length Below 2440 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with 10mm Glass Hose Connections

Laboy Glass Cold Finger Condenser Reflux Cold Trap 200mm in Length Below 24/40 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with 10mm Glass Hose Connections

Laboy Glass Cold Finger Condenser Reflux Cold Trap 200mm in Length Below 24/40 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with 10mm Glass Hose Connections - With two 10mm glass hose connections accommodating 6mm idrubber tubing for coolant fluid in and out. With 24/40 inner joint between the hose connections and finger chamber,the length below the joint is 200mm. Made of high quality borosilicate glass 33,heavy wall design,made by hand-blowing to ensure uniform wall thickness,durable and reusable. 100% 90 day money back guarantee simply return for a full refund,no question asked. A cold finger condenser is used to generate a cold surface on the immersion finger ,used in sublimation apparatus, reflux reaction or distillation apparatus.

 

ACE GLASS 5958-99 Series Condenser with Cold Finger 14 mm OD 625 mm Jacket Length

ACE GLASS 5958-99 Series Condenser with Cold Finger, 14 mm OD, 625 mm Jacket Length

ACE GLASS 5958-99 Series Condenser with Cold Finger, 14 mm OD, 625 mm Jacket Length - Diameter of tube is 14mm. Jacket length is measured from the lower shoulder of the bulb to the bottom of the finger. Used in 6472 pilot plant reactor.

 

9720-13 - Cold Finger Condenser Microscale - Cold Finger Condenser Microscale Ace Glass Incorporated - Each

9720-13 – Cold Finger, Condenser, Microscale – Cold Finger, Condenser, Microscale, Ace Glass Incorporated – Each

9720-13 – Cold Finger, Condenser, Microscale – Cold Finger, Condenser, Microscale, Ace Glass Incorporated – Each - D. Overall body length is approximately 200mm. Microscale cold finger condenser with outside body diameter to fit two sizes of ace-thred bushings water connection tubing is 5mm o. Fabricated from borosilicate glass.

 

Kimble Chase CONDENSER COLD FINGER Adjustable Height Cold Finger Condenser - KMBL

Kimble Chase CONDENSER COLD FINGER Adjustable Height Cold Finger Condenser – KMBL

Kimble Chase CONDENSER COLD FINGER Adjustable Height Cold Finger Condenser – KMBL - Cold finger condensers used to generate a localized cold surface on the exterior of the finger. Offset drip tip manufactured from 33 expansion, low extractable borosilicate glass conforming to usp type i and astm e438, type i, class a requirements overall height (mm) 183 fits tubing id (inches) 1/4 adapter hole diameter (mm) 7 standard taper joints 14/20 length below joint (mm) 150 case qty 1. Commonly used for sublimation, and can also be used in reflux or distillation operations.

 

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 4550 1420

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20 - During solid extractions the extractor operates upon the principle of continuous solvent displacement, permitting the sample to be immersed in solvent at all times, thereby increasing the efficiency of the solid-solvent interactions. The cg-1506-17, 24/40 250ml round bottom flask and auxiliary condenser (cg-1213 or cg-1218-a) are sold separately. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors. Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. Developed by joseph gregar and ken anderson of argonne national laboratories, this extractor is the only unit on the market that can perform all three common types of extraction (see the illustrations). The gregar extractor† is the first major advance in laboratory extractor design in over 100 years.

 

ACE GLASS 9720-23 Micro Condenser Cold Finger 15 Ace-Thread

ACE GLASS 9720-23 Micro Condenser Cold Finger, 15 Ace-Thread

ACE GLASS 9720-23 Micro Condenser Cold Finger, 15 Ace-Thread - Outside diameter is 10mm or 14mm to fit #11 or #15 can accommodate-thread respectively. Code -23 for use with 9718 reactor. Water connection tubing is 5mm o. D. Overall length, 200mm.

 

Kemtech America C114200 Synthware Cold Finger Condenser Drip Tip 2440 Joint 200 mm Length Below Joint 10 mm Hose Connection

Kemtech America C114200 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 200 mm Length Below Joint, 10 mm Hose Connection

Kemtech America C114200 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 200 mm Length Below Joint, 10 mm Hose Connection - Ketch america c114200 synthase cold finger condenser, drip tip, 24/40 joint, 200mm length below joint, 10mm hose connection.

 

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint - Of 10mm at the middle serration. D. Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an o.

 

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer - With 24/25 standard taper joints to connect the flask and cold finger condenser. 5 grams. The sublime has a capacity of 3ml between the lower portion of the cold finger and the interior bottom of the flask. Micro scale sublimer can be used with quantities as small as 0.

 

Corning - Pyrex Replacement Cold Finger Condenser EA1

Corning – Pyrex Replacement Cold Finger Condenser, EA1

Corning – Pyrex Replacement Cold Finger Condenser, EA1 - This specially designed pyrex® cold finger condenser is a replacement part for the pyrex® cyanide distilling apparatus (no. 3350-c).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.