Best and Coolest 23 Retort Stands in 2020

 

Retort Stand Rod 12 - 12mm Dia - 10x15mm Thread - Eisco Labs #ad

Retort Stand Rod, 12″ – 12mm Dia. – 10×1.5mm Thread – Eisco Labs

Retort Stand Rod, 12″ – 12mm Dia. – 10×1.5mm Thread – Eisco Labs #ad - 10 x 15mm thread. Made of high quality, corrosion resistant steel. Rod measures 12″ long and 12mm in diameter. Single rod designed for use with retort stands (not included). Perfect for all lab applications.

 

Sciencent Retort Stand 3 Support Ring Set Premium Lab Metalware Equipment #ad

Sciencent Retort Stand 3 Support Ring Set. Premium Lab Metalware Equipment

Sciencent Retort Stand 3 Support Ring Set. Premium Lab Metalware Equipment #ad - Padded base of this lab stand prevents scratches on the surface and maintains a much required grip during experiments with this, you can have the best chemistry setup, like with separatory funnel and lab jack. Ring stand with polished stainless steel corrosion resistant rod measures 24″ cnc separated for maximum portability. This retort stand set contains a set of 3 retort rings measuring 3″, 4″, 5″ each for lab experiments and are for distillation kit, bunsen burner, essential oil distillation, test tube holder, lab glassware, and other laboratory and chemistry apparatus. The rod of this ring stand comes with a loose & small grip lever to properly screw it in the base. This support stand comes with powder coated polished royal blue base measures 8″x5″ (lxw).

 

Base Retort Stand - A-Frame - 10x12 - Cast Iron - wLeveling Screws - Eisco Labs #ad

Base Retort Stand – A-Frame – 10×12″ – Cast Iron – w/Leveling Screws – Eisco Labs

Base Retort Stand – A-Frame – 10×12″ – Cast Iron – w/Leveling Screws – Eisco Labs #ad - It has 12″ legs and an 11. 5mm metric thread hole and a slick black finish. It has a tapped 10×1. This heavy duty cast iron base retort stand weighs in at right around 10lbs and will withstand the harshest lab applications while providing decades of stability to all of your valuable labware. 5″ width and comes complete with leveling screws on the feet.

 

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301 #ad

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301 #ad - Commonly used in filtration, heating experiment is one of the most widely used instruments in experiments. Application it is suitable for the use of schools, factories, scientific research units, families, hospitals, laboratories, laboratory. Package include 1 x lab retort stand. Stand size 150 x 80 x 4mm. Composion base,iron rod,flask holder,siderosphere(with fixing clip).

 

Laboratory Retort Stand Clamp Durable Adjustable for Holding Bottles Test Tubes Lab Three-jaw Rotating Condenser Flask Clamp #ad

Laboratory Retort Stand Clamp, Durable Adjustable for Holding Bottles Test Tubes Lab Three-jaw Rotating Condenser Flask Clamp

Laboratory Retort Stand Clamp, Durable Adjustable for Holding Bottles Test Tubes Lab Three-jaw Rotating Condenser Flask Clamp #ad - Plastic covered pins would not leave any scratches on objects. Widely used for holding bottles, test tubes and so on in the laboratory. The adjustable clamp base can be easily fixed on one edge of the table. 100% brand new and high quality. Made of durable metal material, the clamp has long service life.

 

Three-Jaw Clamp Lab Tube Clamp Zinc Alloy Flask Clamp Retort Stand Condenser Holder Lab Instrument S #ad

Three-Jaw Clamp Lab Tube Clamp Zinc Alloy Flask Clamp Retort Stand Condenser Holder Lab Instrument (S)

Three-Jaw Clamp Lab Tube Clamp Zinc Alloy Flask Clamp Retort Stand Condenser Holder Lab Instrument (S) #ad - ☼ More stable compared with two-jaw clamp, three-jaw clamp is more stable our three jaw flask clamp is always your good helper in the lab. ☼ corrosion proof surface of the clip is treated with electroplating, so that the clip has a better corrosion-proof effect the clip is a good choice for the laboratory. ☼ Durable material the three jaw lab clamp is made of high quality zinc alloy, which is more durable than normal clamp and has a long service time. ☼ Plastic equipped the clip head equipped with plastic, in that case the clip can hold the flask more firmly, keep the flask from slipping. ☼ Laboratory use the lab clamp is used to fix condensate tube or flask on retort stand and marble titration table.

 

Samfox Two-Jaws Flask Clamp Laboratory Teaching Instrument Chemical Flask Clamp Zinc Alloy Lab Retort Stand Condenser Clamp #ad

Samfox Two-Jaws Flask Clamp, Laboratory Teaching Instrument Chemical Flask Clamp Zinc Alloy Lab Retort Stand Condenser Clamp

Samfox Two-Jaws Flask Clamp, Laboratory Teaching Instrument Chemical Flask Clamp Zinc Alloy Lab Retort Stand Condenser Clamp #ad - 2 finger lab clamp is used to fix condensate tube or flask on retort stand and marble titration table. Surface of the clip is treated with electroplating, better corrosion-proof effectiveness. Lab stand clamp holder is made of high quality zinc alloy, more durable. Equip with plastic, hold the flask more firmly. Light and easy to operate.

 

Three jaw ClampLab Instrument Chemical Three-jaw Clamp Zinc Alloy Retort Stand Condenser Holder S #ad

Three jaw Clamp,Lab Instrument Chemical Three-jaw Clamp Zinc Alloy Retort Stand Condenser Holder (S)

Three jaw Clamp,Lab Instrument Chemical Three-jaw Clamp Zinc Alloy Retort Stand Condenser Holder (S) #ad - Surface of the clip is treated with electroplating, better corrosion-proof effectiveness. Equip with plastic, hold the flask more firmly. This product is used to fix condensate tube or flask on retort stand and marble titration table. Compared with two-jaw clamp, three-jaw clamp is more stable. Made of high quality zinc alloy, more durable.

 

Retort Stand Rod Ring Set - 8x5 Steel Base 235 Stainless Steel Rod 3 4 5 Cast Iron Support Rings - Laboratory Support Assembly - Eisco Labs #ad

Retort Stand, Rod & Ring Set – 8″x5″ Steel Base, 23.5″ Stainless Steel Rod, 3″, 4″ & 5″ Cast Iron Support Rings – Laboratory Support Assembly – Eisco Labs

Retort Stand, Rod & Ring Set – 8″x5″ Steel Base, 23.5″ Stainless Steel Rod, 3″, 4″ & 5″ Cast Iron Support Rings – Laboratory Support Assembly – Eisco Labs #ad - Tapped hole for rod || base features a tapped hole, which fits the included rod, and can accommodate other rods with a 10mm x 15mm metric thread. Manufactured by eisco labs || eisco labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. Industrial quality || this laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm x 15mm metric thread & three, cast iron support rings. Great for classroom & home laboratories || the durable and sturdy construction of this set makes it an excellent choice for science classrooms, household laboratories & basic professional laboratory setups. Stability || the 8″ long by 5″ wide base weighs 175lbs, providing superb stability for experiments & setups the included rod measures 235″ tall and is 12mm in diameter includes three support rings, with diameters of 3″, 4″ & 5″ to support a variety of apparatus.

 

50cm Laboratory Retort Stand Support Base Pillar Frame Ring Clips Chemistry Supplies #ad

50cm Laboratory Retort Stand Support Base Pillar Frame Ring Clips Chemistry Supplies

50cm Laboratory Retort Stand Support Base Pillar Frame Ring Clips Chemistry Supplies #ad - Black coated support stand base (19x12cm). The iron stand for fixing and supporting a variety of instruments, commonly used in filtration, heating experiment. Composition base, iron rod, flask holder, siderosphere(with fixing clip). Application it is suitable for the use of schools, factories, scientific research units, families, hospitals, laboratories, laboratory. Used in conjunction with alcohol lamp simple apparatus for laboratory chemical reactions.

 

Lab Clamp 3 ProngAdjustable Test Tube Flasks ClampFinger Swivel Style Rubber Coated Laboratory Stand Clip87Jaw Retort Stand Condenser Clamp #ad

Lab Clamp 3 Prong,Adjustable Test Tube Flasks Clamp,Finger Swivel Style Rubber Coated Laboratory Stand Clip,8.7″Jaw Retort Stand Condenser Clamp

Lab Clamp 3 Prong,Adjustable Test Tube Flasks Clamp,Finger Swivel Style Rubber Coated Laboratory Stand Clip,8.7″Jaw Retort Stand Condenser Clamp #ad - Plastic covered prongs would not leave any scratches on objects. The adjustable clamp base can be easily fixed on a edge of desk. Made of durable metal material, the clamp has long service life. Widely used for holding flasks, test tubes and so on in lab. 100% brand new and high quality.

 

YaeTek Laboratory Metalware Set Support Stand 21x135cm Rod 50cm Height Retort Ring 6cm and 8cm in Dia #ad

YaeTek Laboratory Metalware Set, Support Stand 21×13.5cm, Rod 50cm Height, Retort Ring 6cm and 8cm in Dia.

YaeTek Laboratory Metalware Set, Support Stand 21×13.5cm, Rod 50cm Height, Retort Ring 6cm and 8cm in Dia. #ad - Size of support stand base 21x135cm = 8”x5”. Hight 50cm. With 2 round jaws burette clamp. High quality lab metalware set steel support ring stand. Size of 2 rings metal retort ring dia6cm=236” dia 8cm=315”.

 

Eisco Labs Research Grade Lab Starter Kit - Includes 24 Rod 8x5 Retort Base Beaker Tongs Crucible Tongs BuretteTest Tube Clamp Ring Stand and More #ad

Eisco Labs Research Grade Lab Starter Kit – Includes 24″ Rod, 8″x5″ Retort Base, Beaker Tongs, Crucible Tongs, Burette/Test Tube Clamp, Ring Stand (and More)

Eisco Labs Research Grade Lab Starter Kit – Includes 24″ Rod, 8″x5″ Retort Base, Beaker Tongs, Crucible Tongs, Burette/Test Tube Clamp, Ring Stand (and More) #ad - Test tube brush is 215cm in total length, the brush section is 100mm in length and 125mm in diameter flask tongs are 250mm in total length, have vinyl coated tips and has a maximum opening of 200mm spatula has both a spoon side and flat side, is a total of 150mm long, and has a maximum width of 20mm crucible tongs are 250mm in length and have a maximum opening of 200mm test tube tongs are 170mm in length and have a maximum opening of 70mm. Test tube/lab instrument rack will hold up to 17 objects (8) small holes have a diameter of 12mm, (6) medium holes have a diameter of 18mm, and (5) large holes have a diameter of 25mm the rack is powder coated and chemically resistant tripod is cast metal and is 190mm in height and has an inner diameter of 75cm and an outer max diameter of 12cm wire mesh is a square with 12cm sides and a 8cm diameter heating surface. The base is 5″x8″ powder coated alloy to resist chemicals and rubber lined bottom to stabilize and prevent bench scratching rod is stainless steel and is 12mm in diameter bosshead holds 2 rods perpendicular to each other and will accept rods up to 24mm in diameter the boss head holds the lab clamp which has a maximum opening of 100mm and a minimum grip of 2mm both the bosshead and clamp are powder coated. Kit contains (1) base, (1) rod, (1) beaker tong, (1) tripod stand, (1) wire mesh for heating, (1) boss head, (1) lab clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush, (1) spatula. Ring clamp with boss head has and inner diameter of 76mm and an outer diameter of 91mm, the bosshead can accept rods up to 20mm in diameter burette clamp holds burettes with diameters up to 22mm (usually 100ml burettes) and is spring loaded with 100% powder coated parts.

 

ARCO Retort Stand Kit Beginner #ad

ARCO Retort Stand Kit, Beginner

ARCO Retort Stand Kit, Beginner #ad - Black retort ring- od 58mm,id 63mm, cast iron. Retort stand base, sheet metal base, 200125mm rod, stainless steel, 12. 5610mm retort clamp, four pronged , with painted clamping jaws take articles from 2-90mm diameter bosshead- die-cast metal alloy, two v-grooves orthogonal to each other to accept rods up to 16. 5mm dia.

 

Hvlystory 50cm Lab Retort Stand Holder Laboratory Flask Condenser Glassware Support Ring Clamp Set #ad

Hvlystory 50cm Lab Retort Stand Holder Laboratory Flask Condenser Glassware Support Ring & Clamp Set

Hvlystory 50cm Lab Retort Stand Holder Laboratory Flask Condenser Glassware Support Ring & Clamp Set #ad - Simple apparatus for laboratory chemical reactions. 3. Commonly used in filtration, heating experiment. 4. Used in conjunction with alcohol lamp. Package included1 x lab retort stand. Features1. 5. The iron stand for fixing and supporting a variety of instruments2. Specificationmaterial metalcolor silver, blacksize as shown in the picturecomposion base, iron rod, flask holder, siderosphere(with fixing clip)application it is suitable for the use of schools, factories, scientific research units, families, hospitals, laboratories, laboratory. One of the most widely used instruments in experiments.

 

Lab Flask Clamp Multi-Functional Chemical Long Handle Flask Clamp Retort Stand Clamp Laboratory Experiment Instrument Diameter 80mm  31in #ad

Lab Flask Clamp, Multi-Functional Chemical Long Handle Flask Clamp Retort Stand Clamp Laboratory Experiment Instrument, Diameter 80mm / 3.1in

Lab Flask Clamp, Multi-Functional Chemical Long Handle Flask Clamp Retort Stand Clamp Laboratory Experiment Instrument, Diameter 80mm / 3.1in #ad - Excellent workmanship, safe and reliable, can be used to fix the equipment used in the experiment. Made of high quality zinc alloy material, it is durable and has excellent chemical resistance. The long handle design can be used to fix the flask when heating on the tripod. It can be widely used in scientific research experiments, teaching experiments, hospitals and laboratories of industrial and mining enterprises. Standard laboratory equipment, small size, light weight, long handle, easy to operate.

 

Laboratory Stand Retort Stand Bracket Chemical Burette Flask Clamp Cast Iron Physical Chemistry Experiments Accessories 60cm236inRetort Stand #ad

Laboratory Stand Retort Stand Bracket Chemical Burette Flask Clamp Cast Iron Physical Chemistry Experiments Accessories 60cm/23.6in(Retort Stand)

Laboratory Stand Retort Stand Bracket Chemical Burette Flask Clamp Cast Iron Physical Chemistry Experiments Accessories 60cm/23.6in(Retort Stand) #ad - ☑ Experimental instruments — the experimental iron retort stand is one of the most commonly used experimental instruments in physical chemistry experiments. ☑ fixed clip for easy observation — with a fixed beaker clip, the flask can be fixed in the experimental process for easy observation. ☑ High quality iron material — it is made of high quality iron material, it is durable, wear-resistant, corrosion-resistant, long-term use. ☑ Practical laboratory aids — excellent workmanship, stable performance, safety and reliability, is a very practical laboratory aids. ☑ Wide application — it is suitable for schools, factories, research institutes, families, hospitals, laboratories, etc.

 

Retort Stand base 12 x 7 300mm x 175mm height 30 750mm #ad

Retort Stand base: 12″ x 7″ (300mm x 175mm); height: 30″ (750mm)

Retort Stand base: 12″ x 7″ (300mm x 175mm); height: 30″ (750mm) #ad - Wide base offers a sturdy setup for your experiments. A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment.

 

197 Lab Retort Stand Support and Flask Condenser Clamp Set #ad

19.7″ Lab Retort Stand Support and Flask Condenser Clamp Set

19.7″ Lab Retort Stand Support and Flask Condenser Clamp Set #ad - Made from high-quality metal and built to lastsolid base provides powerful and reliable support for experiments. Used in conjunction with alcohol lamp simple apparatus for laboratory chemical reactions. The iron stand for fixing and supporting a variety of instruments, commonly used in filtration, heating experiment. Colorblack,sliversize length of pole 50cmbase 19x12cm(detail of size will be shown in the picture). Laboratory stand and clamp is a generally used lab instrument used for physics and chemistry experiment.

 

YaeTek Lab Laboratory Retort Stands Support Clamp Flask Platform Set Lab Metalware Set 52CM #ad

YaeTek Lab Laboratory Retort Stands Support Clamp Flask Platform Set, Lab Metalware Set 52CM

YaeTek Lab Laboratory Retort Stands Support Clamp Flask Platform Set, Lab Metalware Set 52CM #ad - 5cm (detail of size will be shown in the picture) package includes 1 base 1 iron pillar 1 beakers clip 1 fixing clip 2 iron frame ring note, all dimensions are measured by hand, there may be 2-3cm deviations. 5×14. Specifications material iron color black and sliver size length of pole 52cm base 20.

 

Support Stand 8 x 5 Coated Base Size - 24 Corrosion Resistant Rod - Cork Lined Burette Clamp with Boss Head Retort Clamp PVC Coated 3 Prongs and Retort Ring 25 Dia #ad

Support Stand 8″ x 5″ Coated Base Size – 24″ Corrosion Resistant Rod – Cork Lined Burette Clamp with Boss Head, Retort Clamp PVC Coated 3 Prongs and Retort Ring (2.5″ Dia)

Support Stand 8″ x 5″ Coated Base Size – 24″ Corrosion Resistant Rod – Cork Lined Burette Clamp with Boss Head, Retort Clamp PVC Coated 3 Prongs and Retort Ring (2.5″ Dia) #ad - This support stand comes with powder coated polished royal blue base measures 8″x5″ (lxw). Padded base prevents scratches on the surface and maintains a much required grip during experiments. This retort stand set contains a 4 clawed cork lined burette clamp, universal retort clamp with pvc coated 3 prongs and retort ring(25″ dia) for lab experiments polished stainless steel corrosion resistant rod measures 24″. The rod of this ring stand comes with a loose & small grip lever to properly screw it in the base. Clearance sale we are offering no questions asked free replacements these retort stands travel about 4 countries across the globe before reaching you, and might get damaged regardless of our safe packaging if they are in amazing condition, great if they are not, just contact us with a photograph of the defect, and get your replacemen.

 

Adamas-Beta Electroplate Lab Flask Clamp Retort Stand Condenser Holder 304 Stainless Steel Small Size #ad

Adamas-Beta Electroplate Lab Flask Clamp Retort Stand Condenser Holder, 304 Stainless Steel, Small Size

Adamas-Beta Electroplate Lab Flask Clamp Retort Stand Condenser Holder, 304 Stainless Steel, Small Size #ad - Small,made of high quality 305 stainless steel. Easy to install and use. The clip head equipped with plastic, in that case the clip can hold the flask more firmly, keep the flask from slipping. The surface is plated with metal, corrosion resistant and long service life. The lab clamp is used to fix condensate tube or flask on retort stand and marble titration table.

 

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs #ad

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs #ad - Malab lab clamp holder retort stand holder strong plastic 1 pcscondition 100% brand new and high quality material strong plastic diameter this holder can hold 0-19mmlength150mmweight 100 g package content 1 x lab clamp holderuse to hold a clamp in labs.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.