Best and Coolest 23 Rotary Evaporator Bump Traps

 

Chemglass CG-1322-06 Series CG-1322 Modified Rotary Evaporator Bump Trap 250 mL Capacity 2440 Top Outer 2440 Lower Inner

Chemglass CG-1322-06 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1322-06 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner - Traps have a 24/40 top outer joint and the listed size of lower inner joint. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Trap provides expanded volume for reactions that have a tendency to foam excessively.

 

Kemtech A234250 Rotary Evaporator Bump Trap Anti-Splash with Fritted Disc 2440 Outer Upper Joint 2440 Standard Taper Inner Lower Joint 250 mL

Kemtech A234250 Rotary Evaporator Bump Trap, Anti-Splash with Fritted Disc, 24/40 Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 250 mL

Kemtech A234250 Rotary Evaporator Bump Trap, Anti-Splash with Fritted Disc, 24/40 Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 250 mL - Anti-splash adapter, rotary evaporator, fritted disc, synthware, upper joint 24/40, lower joint 24/40, capacity 250ml, frit porosity coarse, frit reduces foam from carryover note these products come in different sizes, what is pictured may not be the item sold.

 

Chemglass CG-1320-01 Series CG-1320 Rotary Evaporator Bump Trap 100 mL Capacity 2440 Top Outer 1420 Lower Inner

Chemglass CG-1320-01 Series CG-1320 Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner

Chemglass CG-1320-01 Series CG-1320 Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner - Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping. ” traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Chemglass CG-1319-02 Series CG-1319 Self Washing Rotary Evaporator Bump Trap 100 mL 2440 Top Outer 2440 Lower Inner

Chemglass CG-1319-02 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 100 mL, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1319-02 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 100 mL, 24/40 Top Outer, 24/40 Lower Inner - Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean.

 

Chemglass CG-1321-03 Series CG-1321 Modified Rotary Evaporator Bump Trap 100 mL Capacity 2440 Top Outer 2440 Lower Inner

Chemglass CG-1321-03 Series CG-1321 Modified Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1321-03 Series CG-1321 Modified Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner - Similar to cg-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Chemglass CG-1321-14 Series CG-1321 Modified Rotary Evaporator Bump Trap 500 mL Capacity 2440 Top Outer 2942 Lower Inner

Chemglass CG-1321-14 Series CG-1321 Modified Rotary Evaporator Bump Trap, 500 mL Capacity, 24/40 Top Outer, 29/42 Lower Inner

Chemglass CG-1321-14 Series CG-1321 Modified Rotary Evaporator Bump Trap, 500 mL Capacity, 24/40 Top Outer, 29/42 Lower Inner - Similar to cg-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Rotary Evaporator Bump Trap glassware 100ml 2440 2440 t

Rotary Evaporator Bump Trap glassware 100ml 24/40 24/40 t

Rotary Evaporator Bump Trap glassware 100ml 24/40 24/40 t - Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you.

 

Chemglass CG-1320-09 Series CG-1320 Rotary Evaporator Bump Trap 500 mL Capacity 2440 Top Outer 2440 Lower Inner

Chemglass CG-1320-09 Series CG-1320 Rotary Evaporator Bump Trap, 500 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1320-09 Series CG-1320 Rotary Evaporator Bump Trap, 500 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner - Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping. ” Traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Chemglass CG-1319-04 Series CG-1319 Self Washing Rotary Evaporator Bump Trap 250 mL 2440 Top Outer 2440 Lower Inner

Chemglass CG-1319-04 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 250 mL, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1319-04 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 250 mL, 24/40 Top Outer, 24/40 Lower Inner - Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube. Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean.

 

Chemglass CG-1321-E-10 Series CG-1321-E Elliptical Rotary Evaporator Bump Trap with Drain Hole 2440 Top Outer Jt 2440 Lower Inner Jt

Chemglass CG-1321-E-10 Series CG-1321-E Elliptical Rotary Evaporator Bump Trap with Drain Hole, 24/40 Top Outer Jt, 24/40 Lower Inner Jt

Chemglass CG-1321-E-10 Series CG-1321-E Elliptical Rotary Evaporator Bump Trap with Drain Hole, 24/40 Top Outer Jt, 24/40 Lower Inner Jt - This allows the use of larger recovery flasks in a rotary evaporator. Unique elliptical shape provides large trap volume while decreasing the overall length when compared to standard spherical designs. Similar to cg-1320-e, but with the addition of (2) 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Rotary evaporator bump trap is used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping”. Traps have a 24/40 top outer joint and a 24/40 lower inner joint.

 

Kemtech A602414 Rotary Evaporator Bump Trap Modified Anti-Splash 2440 Standard Outer Upper Joint 1420 Standard Taper Inner Lower Joint 100 mL

Kemtech A602414 Rotary Evaporator Bump Trap, Modified Anti-Splash, 24/40 Standard Outer Upper Joint, 14/20 Standard Taper Inner Lower Joint, 100 mL

Kemtech A602414 Rotary Evaporator Bump Trap, Modified Anti-Splash, 24/40 Standard Outer Upper Joint, 14/20 Standard Taper Inner Lower Joint, 100 mL - This design prevent possible contamination in the event of bumping. Trap is placed between the vapor tube and the evaporation flask. Has upper outer and lower inner standard taper joints. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

 

Kemtech A604250 Rotary Evaporator Bump Trap Modified Anti-Splash 2440 Standard Outer Upper Joint 2440 Standard Taper Inner Lower Joint 250 mL

Kemtech A604250 Rotary Evaporator Bump Trap, Modified Anti-Splash, 24/40 Standard Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 250 mL

Kemtech A604250 Rotary Evaporator Bump Trap, Modified Anti-Splash, 24/40 Standard Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 250 mL - Has upper outer and lower inner standard taper joints. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Trap is placed between the vapor tube and the evaporation flask.

 

Chemglass CG-1322-04 Series CG-1322 Modified Rotary Evaporator Bump Trap 250 mL Capacity 2440 Top Outer 1420 Lower Inner

Chemglass CG-1322-04 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner

Chemglass CG-1322-04 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner - Traps have a 24/40 top outer joint and the listed size of lower inner joint. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.

 

Chemglass CG-1319-05 Series CG-1319 Self Washing Rotary Evaporator Bump Trap 100 mL 2440 Top Outer 2926 Lower Inner

Chemglass CG-1319-05 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 100 mL, 24/40 Top Outer, 29/26 Lower Inner

Chemglass CG-1319-05 Series CG-1319 Self Washing Rotary Evaporator Bump Trap, 100 mL, 24/40 Top Outer, 29/26 Lower Inner - The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean. Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube.

 

Chemglass CG-1320-252 Series CG-1320 Rotary Evaporator Bump Trap 250 mL Capacity 2942 Top Outer 2942 Lower Inner

Chemglass CG-1320-252 Series CG-1320 Rotary Evaporator Bump Trap, 250 mL Capacity, 29/42 Top Outer, 29/42 Lower Inner

Chemglass CG-1320-252 Series CG-1320 Rotary Evaporator Bump Trap, 250 mL Capacity, 29/42 Top Outer, 29/42 Lower Inner - Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping. ” traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Kemtech A282419 Rotary Evaporator Bump Trap Anti-Splash 2440 Standard Taper Outer Upper Joint 1922 Standard Taper Inner Lower Joint 100 mL

Kemtech A282419 Rotary Evaporator Bump Trap, Anti-Splash, 24/40 Standard Taper Outer Upper Joint, 19/22 Standard Taper Inner Lower Joint, 100 mL

Kemtech A282419 Rotary Evaporator Bump Trap, Anti-Splash, 24/40 Standard Taper Outer Upper Joint, 19/22 Standard Taper Inner Lower Joint, 100 mL - With upper outer and lower inner standard taper joints. This design prevent possible contamination in the event of bumping. Trap is placed between the vapor tube and the evaporation flask.

 

Chemglass CG-1320-03 Series CG-1320 Rotary Evaporator Bump Trap 100 mL Capacity 2440 Top Outer 2440 Lower Inner

Chemglass CG-1320-03 Series CG-1320 Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1320-03 Series CG-1320 Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner - ” traps have a 24/40 top outer joint and the listed size of lower inner joint. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.

 

Chemglass CG-1322-12 Series CG-1322 Modified Rotary Evaporator Bump Trap 250 mL Capacity 2440 Top Outer 2942 Lower Inner

Chemglass CG-1322-12 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 29/42 Lower Inner

Chemglass CG-1322-12 Series CG-1322 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 29/42 Lower Inner - Traps have a 24/40 top outer joint and the listed size of lower inner joint. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.

 

Kemtech A602924 Rotary Evaporator Bump Trap Modified Anti-Splash 2942 Standard Outer Upper Joint 2440 Standard Taper Inner Lower Joint 100 mL

Kemtech A602924 Rotary Evaporator Bump Trap, Modified Anti-Splash, 29/42 Standard Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 100 mL

Kemtech A602924 Rotary Evaporator Bump Trap, Modified Anti-Splash, 29/42 Standard Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 100 mL - Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Has upper outer and lower inner standard taper joints. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

 

Chemglass CG-1317-B-10 Series CG-1317-B Rotary Evaporator Bump Trap Adapter 2440 Joint

Chemglass CG-1317-B-10 Series CG-1317-B Rotary Evaporator Bump Trap Adapter, 24/40 Joint

Chemglass CG-1317-B-10 Series CG-1317-B Rotary Evaporator Bump Trap Adapter, 24/40 Joint - Vapor tube/bump trap adapter is designed to be used with the büchi r-200/205 rotary evaporators. Each adapter is supplied complete with the corresponding size keck clip. Lower portion of the adapter has the listed standard taper inner joint. Adapters have a 50mm od top flange with a tapered interior to fit the büchi sealing ring. The upper stem has 2 large holes flush with the lower end, allowing solvent vapor to flow freely, making this portion of the trap easy to clean. Tapered sidewalls permit continuous washing with condensed solvent, while preventing vapor cooling points along the path of the condenser. This adapter combines a vapor tube adapter and a bump trap.

 

Chemglass CG-1320-06 Series CG-1320 Rotary Evaporator Bump Trap 250 mL Capacity 2440 Top Outer 2440 Lower Inner

Chemglass CG-1320-06 Series CG-1320 Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner

Chemglass CG-1320-06 Series CG-1320 Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 24/40 Lower Inner - Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping. ” Traps have a 24/40 top outer joint and the listed size of lower inner joint.

 

Chemglass CG-1321-04 Series CG-1321 Modified Rotary Evaporator Bump Trap 250 mL Capacity 2440 Top Outer 1420 Lower Inner

Chemglass CG-1321-04 Series CG-1321 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner

Chemglass CG-1321-04 Series CG-1321 Modified Rotary Evaporator Bump Trap, 250 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner - Traps have a 24/40 top outer joint and the listed size of lower inner joint. Similar to cg-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

 

Chemglass CG-1322-01 Series CG-1322 Modified Rotary Evaporator Bump Trap 100 mL Capacity 2440 Top Outer 1420 Lower Inner

Chemglass CG-1322-01 Series CG-1322 Modified Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner

Chemglass CG-1322-01 Series CG-1322 Modified Rotary Evaporator Bump Trap, 100 mL Capacity, 24/40 Top Outer, 14/20 Lower Inner - Trap provides expanded volume for reactions that have a tendency to foam excessively. Traps have a 24/40 top outer joint and the listed size of lower inner joint. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.