Coolest 15 Chemglas in 2020

 

CHEMGLA - Tube- NMR- Screw Cap- Norell- For 400 MHz- 8Lon g- EA1

CHEMGLA – Tube- NMR- Screw Cap- Norell- For 400 MHz- 8”Lon g-, EA1

CHEMGLA – Tube- NMR- Screw Cap- Norell- For 400 MHz- 8”Lon g-, EA1 - Norelltm, tubes, nmr, screw caps norelltm screw cap nmr tubes have a convenient screw cap access with the security of a ptfe® seal. Supplied with open top cap & ptfe® septum for quick and clean access with a 22 gauge standard point needle.

 

CHEMGLA - Decapper- Manual Pliers- 8mm  EA1

CHEMGLA – Decapper- Manual Pliers- 8mm , EA1

CHEMGLA – Decapper- Manual Pliers- 8mm , EA1 - 50, 55 mm. 65 mm. Chemgla, decapper- manual pliers- 8mm , ea1.

 

CHEMGLA - Pipe Coupling- 1 Beaded Black Insert- A 1-7 8 X B 1-116- 35 in-lbs MAX Torque- 716 EA1

CHEMGLA – Pipe Coupling- 1” Beaded Black Insert- ”A” 1-7 /8” X ”B” 1-1/16”- 35 in-lbs MAX Torque- 7/16′, EA1

CHEMGLA – Pipe Coupling- 1” Beaded Black Insert- ”A” 1-7 /8” X ”B” 1-1/16”- 35 in-lbs MAX Torque- 7/16′, EA1 - Couplings allow for a maximum deflection of 4°. Please note tighten all couplings to the proper torque setting. Couplings, beaded pipe complete coupling assembly consists of a 300 series stainless steel outer band with t-bolt, a viton liner, and a tfe sealing ring.

 

CHEMGLA - Heavy Duty Clamp Holder- Fits 14 to 58 Suppo rt Rod EA1

CHEMGLA – Heavy Duty Clamp Holder- Fits 1/4” to 5/8” Suppo rt Rod, EA1

CHEMGLA – Heavy Duty Clamp Holder- Fits 1/4” to 5/8” Suppo rt Rod, EA1 - 35mm) to 5/8″ (15. Useful wherever clamping at 90° is required. 8mm). Fits support rod sizes 1/4″ (6. Large hand knobs allow easy adjusment and secure clamping power. Can be used to support stirrers, temperature monitors and condensers. Heavy duty clamp holders heavy duty epoxy coated alloy clamp has high tensile strength and corrosion resistance.

 

CHEMGLA - Smart Spatula- STERILE- 210mm- Opaque  CS

CHEMGLA – Smart Spatula- STERILE- 210mm- Opaque , CS

CHEMGLA – Smart Spatula- STERILE- 210mm- Opaque , CS - Made of virgin polypropylene, smartspatulas® are an economic alternative to reusable spatulas. Available in 3 convenient sizes macro-green 310 mm, standard-blue and standard-natural 210mm, and antistatic-micro natural 140mm. Disposable smartspatulastm · inexpensive spatulas that scoop, scrape and stir · autotoclavable for sterile applications · antistatic micro for small volumes · unique hollow cores minimize thermal transfer · excellent for use as stir rod or policeman · resistant to dilute acids and bases · comply with fda regulations for food-contact applications made of virgin pp · shatter resistant for liquid nitrogen frozen samples used for sample handling and manipulation in labs across the country. These versatile spatulas can be used to scoop, scrape or stir. Smartspatulas® comply with fda regulations for food-contact applications, are shatter resistant for liquid nitrogen frozen samples and can also be used as a stir rod or policeman. Single-use smartspatulas® help to reduce cross contamination, are resistant to dilute acids and bases, and the unique hollow core minimizes thermal transfer. Smartspatulas® are autoclavable for sterile applications.

 

CHEMGLA - Adapter- Connecting- 2942 Top Outer- 2440Lower Inner- Enlarging EA1

CHEMGLA – Adapter- Connecting- 29/42 Top Outer- 24/40Lower Inner- Enlarging, EA1

CHEMGLA – Adapter- Connecting- 29/42 Top Outer- 24/40Lower Inner- Enlarging, EA1 - Adapters, connecting, enlarging used to connect dissimilar standard taper joint sizes. Adapters with joint combinations other than those listed are available. Lower inner joint is smaller in size than the top outer joint.

 

CHEMGLA - PFA 90° Adapter- 18 Compression To 14 NPT  EA1

CHEMGLA – PFA 90° Adapter- 1/8” Compression To 1/4” NPT , EA1

CHEMGLA – PFA 90° Adapter- 1/8” Compression To 1/4” NPT , EA1 - The connection is achieved by merely inserting the tubing into the fitting assembly and tightening the nut. Compression fittings, pfa, 90° to male npt pfa 90° adapter, compression to male npt fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble.

 

CHEMGLA - Spill Tray- Polypropylene- Fits Reactor Frame CG -1951-100- Dimensions L x W x H in 27 x 28-12 EA1

CHEMGLA – Spill Tray- Polypropylene- Fits Reactor Frame: CG -1951-100- Dimensions L x W x H (in): 27 x 28-1/2, EA1

CHEMGLA – Spill Tray- Polypropylene- Fits Reactor Frame: CG -1951-100- Dimensions L x W x H (in): 27 x 28-1/2, EA1 - Spill trays constructed of chemical-resistant polypropylene or polyethylene (see details below). Contact us for more details. Please note chemglass can custom fabricate spill trays to fit your needs. Tray is designed to contain any accidental spills.

 

CHEMGLA - Funnel- Drum Carboy- 21L- 207mm Top Diameter- Molded of natural polypropylene- aclav at 121°C 2 EA1

CHEMGLA – Funnel- Drum & Carboy- 2.1L- 207mm Top Diameter- Molded of natural polypropylene- aclav at 121°C (2, EA1

CHEMGLA – Funnel- Drum & Carboy- 2.1L- 207mm Top Diameter- Molded of natural polypropylene- aclav at 121°C (2, EA1 - Funnels, drum & carboy large funnels with handles are ideal for filling columns, barrels, tanks, and carboys providing ample volumne and fast flow. The two smaller sizes have a handle at the rim. Molded of natural polypropylene, funnels are autoclavable at 121°c (250°f).

 

CHEMGLA - Funnel- Buchner- 1-150mL- Porcelain  EA1

CHEMGLA – Funnel- Buchner- 1-150mL- Porcelain , EA1

CHEMGLA – Funnel- Buchner- 1-150mL- Porcelain , EA1 - To prevent thermal stress cracks on porcelain ware do not exceed a heating/cooling rate of 200°c per hour. The average coefficient of expansion from 20° to 200°c is 3. Please note additional porcelain items are available from chemglass life sciences. Due to its inherent properties, porcelain labware is widely used in the chemistry laboratory. 69 x 10-5 at 1000°c. 56 x 10-5 gradually increasing to 4. Funnels, buchner, porcelain buchner funnel with fixed perforated plate, glazed both inside and outside with the exception of the top rim. To prolong the life of porcelain products · follow gradual heating/cooling rates · use an oven or hot plate and an intermediate step when quicker heating/cooling rates are required · avoid contact of heated ware with a cold surface · carefully inspect labware prior to each use and do not use any product that appears defective. It has excellent resistance to all reagents except hydrofluoric acid, and is highly resistant to thermal shock while having a very low coefficient of expansion.

 

CHEMGLA - 35x10mm Dish-12mm Well-Glass-Clear  PK20

CHEMGLA – 35x10mm Dish-12mm Well-Glass-Clear , PK20

CHEMGLA – 35x10mm Dish-12mm Well-Glass-Clear , PK20 - Glass thickness is within 0. The optical quality of the glass bottom provides a higher effective numerical aperture producing brighter high resolution images in all types of microscopy applications. They are also ideal for live cell microscopy and live cell imaging. Glass bottom culture dishes, willco-dish glass bottom dish used in confocal, fluorescence and polarized light imaging techniques of in vitro cell cultures. 01mm and permits use of immersion objectives with water, glycerin or oil. The glass bottom willco dish® dish uses a special formulated adhesive with a low toxicity that is durable and optically clear. The glass bottom is flush with the microscope stage or heating stage to ensure high stability and optimum heat exchange. 17 ±0.

 

CHEMGLA - Funnel- Weighing- PP- 2mL Solid Capacity- 2mL Liq uid Capacity EA1

CHEMGLA – Funnel- Weighing- PP- 2mL Solid Capacity- 2mL Liq uid Capacity, EA1

CHEMGLA – Funnel- Weighing- PP- 2mL Solid Capacity- 2mL Liq uid Capacity, EA1 - Chemgla, decapper- crimp type- 11mm , ea1. Chemgla, funnel- weighing- pp- 2ml solid capacity- 2ml liq uid capacity, ea1. Chemgla, plate w/ 07ml inserts- microplate sealing system , ea1.

 

CHEMGLA - Stand Assembly- Mobile- Benchtop Process Reactor- SS Teflon Coated EA1

CHEMGLA – Stand Assembly- Mobile- Benchtop Process Reactor- SS & Teflon Coated, EA1

CHEMGLA – Stand Assembly- Mobile- Benchtop Process Reactor- SS & Teflon Coated, EA1 - The stand provides support for the reaction vessel(s), glassware, overhead stirring motor, and temperature monitor. Allows small scale reactors to be setup in walk-in hoods near existing heater/chillers. Stand can hold a single reactor or two reactors side by side. Benchtop support stands, mobile similar to the cg-1950-100, but reactor stand is mobile and is designed to fit into most walk-in hoods.

 

CHEMGLA - 2000ml Erlenmeyer Flask-Neck fits  10 Rubber Stop per EA1

CHEMGLA – 2000ml Erlenmeyer Flask-Neck fits # 10 Rubber Stop per, EA1

CHEMGLA – 2000ml Erlenmeyer Flask-Neck fits # 10 Rubber Stop per, EA1 - An extra large marking space is also provided. Heavy, durable top tooling. Flask, erlenmeyer, 2000ml, requires a # 10 rubber stopper, approx graduations are in durable white enamel. Stopper is not included.

 

CHEMGLA - Plate w 07mL Inserts- Microplate Sealing System  EA1

CHEMGLA – Plate w/ 0.7mL Inserts- Microplate Sealing System , EA1

CHEMGLA – Plate w/ 0.7mL Inserts- Microplate Sealing System , EA1 - Chemgla, plate w/ 07ml inserts- microplate sealing system , ea1. 65 mm. 50, 55 mm.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.