Top 16 Supports

 

Ajax Scientific Cast Iron Support Ring with Clamp 3 Diameter

Ajax Scientific Cast Iron Support Ring with Clamp, 3″ Diameter

Ajax Scientific Cast Iron Support Ring with Clamp, 3″ Diameter - Distance from center of ring to center of boss head is 4-1/4-inches. 3-inches diameter. For use on support rods, lattices etc. Cast iron enamel finish with brass thumbscrew. Ajax scientific support ring with integrated boss heads.

 

Tripod Base Support Stand Rod dia 05 in x L 36 in

Tripod Base Support Stand, Rod dia.: 0.5 in. x L: 36 in.

Tripod Base Support Stand, Rod dia.: 0.5 in. x L: 36 in. - Wide footprint and heavy, cast iron base offers a sturdy foundation for any lab setup. A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment.

 

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish 11 Length x 6 Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 11″ Length x 6″ Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 11″ Length x 6″ Width Base Size - Type is coated with an acid resistant finish. Available in stamped steel. Base size 11″ length by 6″ width, rod size 1/2″ diameter by 36″ length. Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base.

 

PUL FACTORY Laboratory Metalware SetSupport Stand 21x135cm Rod 50cm Length Retort Ring 6cm and 8cm in Dia

PUL FACTORY Laboratory Metalware Set,Support Stand 21×13.5cm, Rod 50cm Length, Retort Ring 6cm and 8cm in Dia.

PUL FACTORY Laboratory Metalware Set,Support Stand 21×13.5cm, Rod 50cm Length, Retort Ring 6cm and 8cm in Dia. - Black coated support stand base (21x135cm = 8”x5”). 2 round jaws burette clamp. Good quality lab metalware set. Stamped steel support ring stand with 2 rings metal retort ring (dia6cm=236” and dia 8cm=315”). Metal rod (50cm l).

 

20pcs Nylon PCB Circuit Board Reverse Mount Support Spacing Height 8mm

20pcs Nylon PCB Circuit Board Reverse Mount Support Spacing Height 8mm

20pcs Nylon PCB Circuit Board Reverse Mount Support Spacing Height 8mm - 2. Used for board-to-board and chassis-to-board requirements, they come in both push-in mount and screw mount versions. 4. Description1. Spacers/supports are available in a wide range of spacing heights and will meet almost any pcb packaging need. To fix the pcb without tools, easy to install and unload anti-erode, good insulation with long life. Ideally suited for pcb packaging and stacking applications, these new spacers/supports come in seven popular styles. 3.

 

Full-View Series 207 Blue Test tube Support Diameter 10 - 13 Tubes 80 Drying Pins 102 9 x 3 12 x 2 58

Full-View Series 207 Blue Test tube Support Diameter 10 – 13, Tubes 80, Drying Pins 102, 9″ x 3 1/2″ x 2 5/8″

Full-View Series 207 Blue Test tube Support Diameter 10 – 13, Tubes 80, Drying Pins 102, 9″ x 3 1/2″ x 2 5/8″ - Heavy duty construction. High density polypropyleneheavyduty construction. Made in usa.

 

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish 6 Length x 4 Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 6″ Length x 4″ Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 6″ Length x 4″ Width Base Size - Nickel-plated steel rod threaded to fit base for stability. Acid-resistant finish for durability. Support ring stand for laboratory use. Stamped steel for strength and resistance to corrosion. Base measures 60 x 40 inches (l x w), and rod measures 18″ (l) with 5/16″ diameter.

 

United Scientific SSB6X1-CI Support Stand with Cast Iron Base 11 Base Length x 6 Base Width

United Scientific SSB6X1-CI Support Stand with Cast Iron Base, 11″ Base Length x 6″ Base Width

United Scientific SSB6X1-CI Support Stand with Cast Iron Base, 11″ Base Length x 6″ Base Width - Unitsci, support stand w/ rod, cast iron, 6″ x 11″ base w/ 36″ rod, ea1. Covered jaws for protection and grip. Maximum width of jaw opening is 90mm. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. 3 finger clamp accepts rods up to 20 mm.

 

All American 4180 Metal Support Base for 75X Sterilizer

All American 4180 Metal Support Base for 75X Sterilizer

All American 4180 Metal Support Base for 75X Sterilizer - Outside diameter, 16 1/4″. Elevates sterilizer 2 1/4″ above surface. Inside diameter, 15″. All american part no4180.

 

Beyondsupply-Lab Cast Iron Ring Stand Support Ring Clamp 3 Pieces

Beyondsupply-Lab Cast Iron Ring Stand, Support Ring Clamp (3 Pieces)

Beyondsupply-Lab Cast Iron Ring Stand, Support Ring Clamp (3 Pieces) - Cast iron ring stand, support ring clamp (3 pieces). Made of cast ironbaking varnish. Shown as picture. Id 55mm 65mm and 85mm. Swivel.

 

American Educational Cast Iron Support Ring and Clamp 6 OD

American Educational Cast Iron Support Ring and Clamp, 6″ OD

American Educational Cast Iron Support Ring and Clamp, 6″ OD - American educational products manufactures learning materials in math, science, and reading/language arts for students in pre-kindergarten through grade 12. The company, founded in 1986, is headquartered in fort collins, co.

 

United Scientific SRCI07 Cast Iron Support Ring 7 Diameter

United Scientific SRCI07 Cast Iron Support Ring, 7″ Diameter

United Scientific SRCI07 Cast Iron Support Ring, 7″ Diameter - Cast iron support ring used with laboratory stands. 7″ diameter ring.

 

Karter Scientific 209Q2 Cast Iron Laboratory Support Ring with Clamp 2 inch 50mm

Karter Scientific 209Q2 Cast Iron Laboratory Support Ring with Clamp, 2 inch, 50mm

Karter Scientific 209Q2 Cast Iron Laboratory Support Ring with Clamp, 2 inch, 50mm - D50mm. Karter scientific® is a registered trademark in united states of america. To maintain quality control, authorized permission is required in the resale of our products. Support rings, cast iron , single adjustment clampring i.

 

American Educational Cast Iron Triangular Base Support Stand with Black Enamel Acid Resistant Finish 5 Legs 12 Diameter x 24 Length Rod Size

American Educational Cast Iron Triangular Base Support Stand with Black Enamel Acid Resistant Finish, 5″ Legs, 1/2″ Diameter x 24″ Length Rod Size

American Educational Cast Iron Triangular Base Support Stand with Black Enamel Acid Resistant Finish, 5″ Legs, 1/2″ Diameter x 24″ Length Rod Size - Rod measures 1/2″ diameter by 24″ length. 5″ legs. The removable rod is nickel plated steel and threaded to fit the base. Support stand with triangular base. The open triangular base is made of cast iron with a black enamel, acid resistant finish.

 

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish 9 Length x 6 Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 9″ Length x 6″ Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 9″ Length x 6″ Width Base Size - Type is coated with an acid resistant finish. The rods are nickel plated steel and are threaded to fit the base. Base size 9″ length by 6″ width, rod size 1/2″ diameter by 24″ length. Available in stamped steel. Strong and dependable support.

 

SEOH WIRE SUPPORT RINGS w CLAMP 5

SEOH WIRE SUPPORT RINGS w/ CLAMP 5

SEOH WIRE SUPPORT RINGS w/ CLAMP 5 - 3373-1 5″ ring diameter. Nickel plated brass clamping screw. Accepts rods up to 3/4″ diameter. Wire support rings with clamp plated steel ring with threaded stem attached to an aluminum clamp baked enamel finish for mounting on rods.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.