Top 22 Viscosity Standards for 2019

 

Cannon Cold-Cranking Simulator Standards CL250 Viscosity Standard #ad

Cannon Cold-Cranking Simulator Standards, CL250 Viscosity Standard

Cannon Cold-Cranking Simulator Standards, CL250 Viscosity Standard #ad - Conform to sae specification j300 and astm d 5293. Supplied in one pint bottles. Traceable to nist. Viscosities based on nist value of 10016 centipoise for water at 20°c.

 

Cannon Instruments 9727-C51016 Viscosity Standard 20 Degree C to 100 Degree C N10200 500 mL Volume #ad

Cannon Instruments 9727-C51.016 Viscosity Standard, 20 Degree C to 100 Degree C, N10200, 500 mL Volume

Cannon Instruments 9727-C51.016 Viscosity Standard, 20 Degree C to 100 Degree C, N10200, 500 mL Volume #ad - 9727c35, c40 and c60 viscosity standards are also used for say bolt viscosity determinations and include say bolt viscosity values. Approximate viscosities at varying temperatures in centistokes and centipoises are given in table 1 each standard is furnished with actual viscosity and density values.

 

Cannon Cold-Cranking Simulator Standards CL280 Viscosity Standard #ad

Cannon Cold-Cranking Simulator Standards, CL280 Viscosity Standard

Cannon Cold-Cranking Simulator Standards, CL280 Viscosity Standard #ad - Supplied in one pint bottles. Viscosities based on nist value of 10016 centipoise for water at 20°c. Conform to sae specification j300 and astm d 5293. Traceable to nist.

 

Cannon Low Temperature Viscosity Standards N38B Viscosity Standard 500 ml Volume #ad

Cannon Low Temperature Viscosity Standards, N38B Viscosity Standard, 500 ml Volume

Cannon Low Temperature Viscosity Standards, N38B Viscosity Standard, 500 ml Volume #ad - Based on nist value of 10016 centipoise for water at 20°c traceable to the nist. In accordance with astm standard d 4624.

 

CANNON C20 Viscosity Standards for Zahn Shell and Ford Cups 34 mm2s Kin Vis 500mL #ad

CANNON C20 Viscosity Standards for Zahn, Shell, and Ford Cups, 34 mm2/s Kin Vis (500mL)

CANNON C20 Viscosity Standards for Zahn, Shell, and Ford Cups, 34 mm2/s Kin Vis (500mL) #ad - Contain hydrocarbon oils or synthetic oils for all ingredients, see msds documents. Standards based on the national institute of standards and technology (nist) value of 10016 millipascal-seconds (centipoise) for water at 20 degrees c (68 degrees f). Standards to calibrate zahn, shell, or ford cup viscometers, used to measure the viscosity of liquids such as ink or paint. Choice of nine standards with kinematic viscosities ranging from 89 to 1,600mm2/second.

 

Cannon Cold-Cranking Simulator Standards CL120 Viscosity Standard #ad

Cannon Cold-Cranking Simulator Standards, CL120 Viscosity Standard

Cannon Cold-Cranking Simulator Standards, CL120 Viscosity Standard #ad - Supplied in one pint bottles. Conform to sae specification j300 and astm d 5293. Viscosities based on nist value of 10016 centipoise for water at 20°c. Traceable to nist.

 

BYK-Gardner 4043 Certified Viscosity Standard Oils for Rotational Viscometers Brookfield-Type RT500 #ad

BYK-Gardner 4043 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT500

BYK-Gardner 4043 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT500 #ad - (470 ml) except cap oils. These oils are used to confirm the viscometer is measuring within specification. Byk-gardner offers a comprehensive line of certified standard viscosity oils. For practical purpose, these oils are newtonian liquids, standard bottle size is 1 pt.

 

Cannon Cold-Cranking Simulator Standards CL100 Viscosity Standard #ad

Cannon Cold-Cranking Simulator Standards, CL100 Viscosity Standard

Cannon Cold-Cranking Simulator Standards, CL100 Viscosity Standard #ad - Viscosities based on nist value of 10016 centipoise for water at 20°c. Traceable to nist. Supplied in one pint bottles. Conform to sae specification j300 and astm d 5293.

 

Cannon Cold-Cranking Simulator Standards CL740 Viscosity Standard #ad

Cannon Cold-Cranking Simulator Standards, CL740 Viscosity Standard

Cannon Cold-Cranking Simulator Standards, CL740 Viscosity Standard #ad - Supplied in one pint bottles. Viscosities based on nist value of 10016 centipoise for water at 20°c. Traceable to nist. Conform to sae specification j300 and astm d 5293.

 

Cannon Instrument Cold-Cranking Simulator Standard CL130 Viscosity Standard -5°C to -35°C 500 ml Volume #ad

Cannon Instrument Cold-Cranking Simulator Standard, CL130 Viscosity Standard, -5°C to -35°C, 500 ml Volume

Cannon Instrument Cold-Cranking Simulator Standard, CL130 Viscosity Standard, -5°C to -35°C, 500 ml Volume #ad - Viscosity standard for low-temperature gear oils including sae 70w, 75w, 80w and 85w as well as atf fluids. Meets astm d 2983 specifications. Provides viscosities in centistokes/centipoise of 45,000/40,000 at -40 degrees f, 22,000/20,000 at -30 degrees f, 12,000/10,000 at -20 degrees f, 8,000/7,000 at -15 degrees f, 6,100/5,000 at -10 degrees f, and 3,500/3,000 at 0 degrees f. Traceable to national institute of standards and technology (nist) standards.

 

Cannon Instrument - 9727-G45004 - VISCOSITY STANDARD N2B 012 L Each #ad

Cannon Instrument – 9727-G45.004 – VISCOSITY STANDARD N2B 0.12 L. (Each)

Cannon Instrument – 9727-G45.004 – VISCOSITY STANDARD N2B 0.12 L. (Each) #ad - Standard^ viscosity standard, n2b, low temperature, used for calibration and verification procedures for all types of viscometers, including glass capillary viscometers, rotational viscometers, falling ball viscometers, cup viscometers, meet astm d 2983, 120 ml this listing is for each.

 

Cannon General Purpose Viscosity Standards 20°C To 100°C 500ml Volume N75 Viscosity Standard #ad

Cannon General Purpose Viscosity Standards, 20°C To 100°C, 500ml Volume, N75 Viscosity Standard

Cannon General Purpose Viscosity Standards, 20°C To 100°C, 500ml Volume, N75 Viscosity Standard #ad - All cannon viscosity standards meet the precision specifications of astm d 445/446 and iso 3104/3105, and are traceable to the nist (national institute of standards and technology). A2la has accredited cannon for technical competence in the field of calibration (certificate number 1262. Calibration or verification with a certified viscosity standard helps to ensure the reliability of measurements made with any viscometer. All calibrations are based on the master viscometer procedures detailed in astm d 2162. Cannon viscosity standards are manufactured and/or certified in cannon’s iso 90012008 registered and a2la-accredited laboratory. 01). The accreditation includes the determination of kinematic and dynamic viscosity (including that of viscosity standards and customer samples) in accordance with iso/iec 17025-2005. Cannon certified standards are useful for calibration and verification procedures for all types of viscometers, including glass capillary viscometers, rotational viscometers, falling ball viscometers, cup viscometers, and others.

 

Cannon High Viscosity Standards N450000 500 ml Capacity #ad

Cannon High Viscosity Standards N450000, 500 ml Capacity

Cannon High Viscosity Standards N450000, 500 ml Capacity #ad - These standards are furnished in a range of viscosities and temperatures which are of particular interest in asphalt viscosity determinations and the determination of the viscosities of polymers. See astm d 2170 and d 2171.

 

Cannon Instrument Cold-Cranking Simulator Standard CL340 Viscosity Standard -5°C to -35°C 500 ml Volume #ad

Cannon Instrument Cold-Cranking Simulator Standard, CL340 Viscosity Standard, -5°C to -35°C, 500 ml Volume

Cannon Instrument Cold-Cranking Simulator Standard, CL340 Viscosity Standard, -5°C to -35°C, 500 ml Volume #ad - Provides viscosities in centistokes/centipoise of 45,000/40,000 at -40 degrees f, 22,000/20,000 at -30 degrees f, 12,000/10,000 at -20 degrees f, 8,000/7,000 at -15 degrees f, 6,100/5,000 at -10 degrees f, and 3,500/3,000 at 0 degrees f. Traceable to national institute of standards and technology (nist) standards. Meets astm d 2983 specifications. Viscosity standard for low-temperature gear oils including sae 70w, 75w, 80w and 85w as well as atf fluids.

 

Cannon Instruments 9727-C46016 Viscosity Standard 20 Degree C to 100 Degree C N4 500 mL Volume #ad

Cannon Instruments 9727-C46.016 Viscosity Standard, 20 Degree C to 100 Degree C, N.4, 500 mL Volume

Cannon Instruments 9727-C46.016 Viscosity Standard, 20 Degree C to 100 Degree C, N.4, 500 mL Volume #ad - 9727c35, c40 and c60 viscosity standards are also used for say bolt viscosity determinations and include say bolt viscosity values. Approximate viscosities at varying temperatures in centistokes and centipoises are given in table 1 each standard is furnished with actual viscosity and density values.

 

Cannon General Purpose Viscosity Standards 20°C To 100°C 500ml Volume N1400 Viscosity Standard #ad

Cannon General Purpose Viscosity Standards, 20°C To 100°C, 500ml Volume, N1400 Viscosity Standard

Cannon General Purpose Viscosity Standards, 20°C To 100°C, 500ml Volume, N1400 Viscosity Standard #ad - Cannon certified standards are useful for calibration and verification procedures for all types of viscometers, including glass capillary viscometers, rotational viscometers, falling ball viscometers, cup viscometers, and others. All calibrations are based on the master viscometer procedures detailed in astm d 2162. Cannon viscosity standards are manufactured and/or certified in cannon’s iso 90012008 registered and a2la-accredited laboratory. The accreditation includes the determination of kinematic and dynamic viscosity (including that of viscosity standards and customer samples) in accordance with iso/iec 17025-2005. A2la has accredited cannon for technical competence in the field of calibration (certificate number 1262. All cannon viscosity standards meet the precision specifications of astm d 445/446 and iso 3104/3105, and are traceable to the nist (national institute of standards and technology). 01). Calibration or verification with a certified viscosity standard helps to ensure the reliability of measurements made with any viscometer.

 

BYK-Gardner 4004 Certified Viscosity Standard Oils for Zahn and Ford Flow Cups C100 #ad

BYK-Gardner 4004 Certified Viscosity Standard Oils for Zahn and Ford Flow Cups, C100

BYK-Gardner 4004 Certified Viscosity Standard Oils for Zahn and Ford Flow Cups, C100 #ad - Data certified at 25°c (77°f). These oils are used to confirm the drain time of the flow cups are within specification. Ford cup drain time 64 sec. Zahn cup drain time 27/21 sec. Byk-gardner offers a comprehensive line of certified standard viscosity oils.

 

Cannon Instrument Cold-Cranking Simulator Standard CL420 Viscosity Standard -5°C to -35°C 500 ml Volume #ad

Cannon Instrument Cold-Cranking Simulator Standard, CL420 Viscosity Standard, -5°C to -35°C, 500 ml Volume

Cannon Instrument Cold-Cranking Simulator Standard, CL420 Viscosity Standard, -5°C to -35°C, 500 ml Volume #ad - Viscosity standard for low-temperature gear oils including sae 70w, 75w, 80w and 85w as well as atf fluids. Provides viscosities in centistokes/centipoise of 45,000/40,000 at -40 degrees f, 22,000/20,000 at -30 degrees f, 12,000/10,000 at -20 degrees f, 8,000/7,000 at -15 degrees f, 6,100/5,000 at -10 degrees f, and 3,500/3,000 at 0 degrees f. Meets astm d 2983 specifications. Traceable to national institute of standards and technology (nist) standards.

 

BYK-Gardner 4041 Certified Viscosity Standard Oils for Rotational Viscometers Brookfield-Type RT50 #ad

BYK-Gardner 4041 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT50

BYK-Gardner 4041 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT50 #ad - These oils are used to confirm the viscometer is measuring within specification. Byk-gardner offers a comprehensive line of certified standard viscosity oils. (470 ml) except cap oils. For practical purpose, these oils are newtonian liquids, standard bottle size is 1 pt.

 

BYK-Gardner 4046 Certified Viscosity Standard Oils for Rotational Viscometers Brookfield-Type RT12500 #ad

BYK-Gardner 4046 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT12500

BYK-Gardner 4046 Certified Viscosity Standard Oils for Rotational Viscometers, Brookfield-Type, RT12500 #ad - These oils are used to confirm the viscometer is measuring within specification. For practical purpose, these oils are newtonian liquids, standard bottle size is 1 pt. (470 ml) except cap oils. Byk-gardner offers a comprehensive line of certified standard viscosity oils.

 

Cannon General Purpose Viscosity Standards 20 to 100° Celsius 500ml Volume Size N35 #ad

Cannon General Purpose Viscosity Standards, 20 to 100° Celsius, 500ml Volume, Size N35

Cannon General Purpose Viscosity Standards, 20 to 100° Celsius, 500ml Volume, Size N35 #ad - 9727c35, c40 and c60 viscosity standards are also used for saybolt viscosity determinations and include saybolt viscosity values. Approximate viscosities at varying temperatures in centistokes and centipoises are given in table 1 each standard is furnished with actual viscosity and density values.

 

Cannon Instrument Cold-Cranking Simulator Standard CL150 Viscosity Standard -5°C to -35°C 500 ml Volume #ad

Cannon Instrument Cold-Cranking Simulator Standard, CL150 Viscosity Standard, -5°C to -35°C, 500 ml Volume

Cannon Instrument Cold-Cranking Simulator Standard, CL150 Viscosity Standard, -5°C to -35°C, 500 ml Volume #ad - Meets astm d 2983 specifications. Viscosity standard for low-temperature gear oils including sae 70w, 75w, 80w and 85w as well as atf fluids. Traceable to national institute of standards and technology (nist) standards. Provides viscosities in centistokes/centipoise of 45,000/40,000 at -40 degrees f, 22,000/20,000 at -30 degrees f, 12,000/10,000 at -20 degrees f, 8,000/7,000 at -15 degrees f, 6,100/5,000 at -10 degrees f, and 3,500/3,000 at 0 degrees f.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.